Take control of your performances. The Dynacord CMS 600-3 8-Channel Mixer will provide you with incredible sound quality and precise control over every aspect of your performances.
Dynacord ensure that their mixers are made with only the finest components. This ensures you’ll receive a desk that’s built to last, providing you with many decades of happy continued use.
The great sound you achieve with the desk can be archived thanks to the integrated interface. This allows you to plug directly into your operating system and record any performance into your preferred DAW. Why settle for less when you can have the best thanks to the Dynacord CMS 600-3 8-Channel Mixer.
Premium channel features: The CMS 600-3 provides you with 4 mic/line level inputs. Each of the inputs offers a variety of professional features such as equalization, gain adjustment, and panning. The inclusion of phantom power allows you to record with your favorite condenser microphones. These will help you create the most fantastic performances.
Each channel provides you with three sends. These are FX Auxiliary and Monitor. You’ll also be able to check the quality of the signal at all times thanks to LED monitoring.
Flexible effect processing: Take your productions to the next level. The inclusion of two 24-bit DSP powered effect processors empowers you with studio quality sounds to inject into your performances. As they’re DSP powered, they operate independently, meaning no extra strain is put onto your desk, reducing the risk of power failure and overheating in high-profile, high-pressure scenarios.
Included In The Box:
1 x CMS 600-3
1 x User Manual
1 x Mains Cord
1 x Warranty Certificate With Safety Instructions
1 x DVD With USB Drivers and Cubase LE Software
Features:
– First-class components with faders & potentiometers
– Intuitive, easy-to-use mixer section
– 2 x editable digital effects devices
– Professional 4 x In / 4 x Out digital interface
– Stereo EQ for main mix
– Large OLED display
Specifications:
– Channels: 4 and 2 and 2
– Mic/Line-Mono: 4
– Mic/Line-Mono/USB-Stereo (Super Channel): 2
– Line L-R/CD-In-Stereo: 2
– Auxiliaries (AUX Mon): Pre/Post Switchable
– Pre Mic Gain (Line -20 dB): +10 to +60 dB
– Trim Line/CD (Stereo): -10 to + 20 dB
– THD At 1kHz Mic Input To Master A L/R Outputs +16 dBu Typical: Frequency Response -3 dB Any Input To Any Mixer Output: 15Hz – 70kHz Crosstalk 1kHz Channel to Channel: Mute and Standby Switch Attenuation: Fader and FX/AUX/MON-Send Attenuation: >85 dB
– CMRR MIC Input: >80 dB
– Input Sensitivity Mic: -74 dBu
– Line (Mono): -54 dBu
– Line (Stereo): -34 dBu
– CD (Stereo): -34 dBu
– Maximum Level Mixing Desk:
– Mic Inputs: +12 dBu
– Mono Line Inputs: +31 dBu
– Stereo Line Inputs: +30 dBu
– All Other Inputs: +22 dBu
– All Other Outputs: +22 dBu
– Input Impedance Mic: 2kΩ
– CD In: 10kΩ
– All Other Inputs: >15kΩ
– Output Impedance:
– Phones: 47Ω
– All Other Outputs: 75Ω (Unbalanced), 150Ω (Balanced)
– Equivalent Input Noise Mic Input A-Weighted 150Ω: -130 dBu
– Noise Channel Inputs to Master A L/R Outputs A-Weighted Master Fader Down: -100 dBu
– Master Fader 0 dB Channel Fader Down: -92 dBu
– Master Fader 0 dB Channel Fader 0 dB Channel Gain Unity: -82 dBu
– Equalization:
– LO Shelving: ±15 dB / 60Hz
– MID Peaking Stereo Inputs: ±12 dB / 2.4kHz
– HI Shelving: ±15 dB / 12kHz
– Master EQ 9-Band: ±10 dB / Q = 1.5 to 2.5
– Filter Lo-Cut Mono Inputs: F = 80Hz 18 dB/oct. Switchable
– Effects Type: Dual Stereo 24/48-Bit Multi Effects Processors
– Effects Presets: 100 Factory and 20 User
– Tap-Delay Remote Control: Footswitch MIDI
– Display: 128 x 64 Pixels OLED
– Digital Audio Interface:
– Channels: 4 In / 4 Out
– AD/DA Conversion: 24-Bit
– Sampling Rate: 44.1 / 48 / 88.2 / 96kHz
– PC Interface: USB 2.0 Female Type B
– Peak Display: 6 dB Before Clip
– MIDI Interface: 5-Pin DIN Connector In / Out
– Output Power Control (Speaker Protection): Adjustable Longterm RMS Limiter
– Protection Mixer Outputs Relay Controlled: AUX MON MASTER A L/R
– Switching Mode Power Supply: Mains Over/Undervoltage
– Phantom Power Switchable: 48V DC
– Power Requirements: 100V to 240V AC 50/60Hz
– Power Consumption: 35W
– Safety Class: I
– Weight: 5.8 kg
– Dimensions:
– Height: 108.6 mm
– Width: 416.9 mm
– Depth: 347.8 mm
– Product Code: CMS 600-3