Get the most out of your speakers. Supply them with only the frequencies they need and get maximum efficiency with a dbx 223xs Stereo 2-Way/Mono 3-Way Crossover. When you give each driver only the frequencies it needs it can use every drop of its power handling on the audible signal. The result is simple – clear powerful undistorted sound. You can operate the crossover in 3-way mono or 2-way stereo modes. This gives a good amount of versatility for use with different speaker combinations. Youll also be getting sharp high quality and clean filtering thanks to the Linkwitz-Riley 24dB per octave filters.
Clean clear cut filters The 223xs is a dual channel crossover with Linkwitz-Riley 24dB per octave filters and optional mono summing of the low frequency output. Both channels feature a x10 range switch to multiply the crossover frequency range by a power of 10 and a 40Hz high pass (low cut) filter. Each output has independent gain controls for level matching and a phase reverse switch. Features XLR balanced inputs and outputs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter on both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode Specifications Input Connectors: XLR (Pin 2 Hot) Input Type: Electronically Balanced / Unbalanced RF Filtered Input Impedance: Balanced >50kOhm Unbalanced >25kOhm Max Input: >+22dBu Balanced or Unbalanced CMRR: >40dB Typically >55dB at 1kHz Output Connectors: XLR Output Type: Impedance-Balanced / Unbalanced RF Filtered Output Impedance: Balanced 200 Ohm Unbalanced 100 Ohm Max Output: >+21dBu Balanced / Unbalanced into 2kOhms or Greater Bandwidth: 20Hz to 20kHz +/-0.5dB Frequency Response: <3Hz to >90kHz +0/-3dB Signal to Noise Ratio: Ref: +4dBu 22kHz Measurement Bandwidth Signal to Noise (Stereo Mode): >94dB (Low Output) >91dB (High Output) Signal to Noise (Mono Mode): >94dB (Low Output) >93dB (Mid Output) >91dB (High Output) Dynamic Range: >106dB Unweighted Any Output THD+Noise: <0.004% at +4dBu 1kHz; <0.04% at +20dBU 1kHz Interchannel Crosstalk: <-80dB 20Hz to 20kHz Crossover Frequencies: 45 to 960Hz or 450Hz to 9.6kHz (x10 Setting) Crossover Filter Type: Linkwitz-Riley 24dB/Octave State-Variable Power Consumption: 15W
CHECK PRICES AT ZZOUNDS
