A lineage of great outboard gear informs the design of this fantastic studio tool. The dbx 131s Single 31-Band Constant Q Graphic EQ operates as your central EQing unit in your studio or on stage. Once installed take immediate advantage of its exceptional sound shaping capabilities. Equalization takes your music and sound installations from good to great. This signal processor is a must have for the serious producer or the hard-working live sound engineer.
Streamlined – incredibly deep Through its 31 bands of audio EQ you can shape your sound exactly how you want with total ease. Allowing you to boost/cut in range of 6 to 12 – its got plenty of scope to attenuate frequencies you dont want and boosts ones you do. No matter how demanding the job the dbx 131s can handle it. All without breaking the bank. Stuffed full of features Alongside the 31-band EQ there is a front panel bypass switch to help you reference the pre-EQ sound during mixdown. 4-segment LED for monitoring output levels help you deal with levels at higher levels. Fully compatible with XLR and TRS inputs and outputs – its ready for any situation. Features Single 31-band 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of ±6 or ±12dB 12dB per octave 3dB down @ 50Hz low-cut filter Front panel bypass switch ±12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Response of less than 10Hz to more than 50kHz Dynamic range of greater than 108dB Specifications Input Connectors: 1/4″ TRS female XLR (pin 2 hot) Input Type: Electronically balanced/unbalanced RF filtered Input Impedance: Balanced 40k ohm unbalanced 20k ohm Max Input: >+21dBu balanced or unbalanced CMRR: >40dB typically >55dB at 1kHz Output Connectors: 1/4″ TRS male XLR (pin 2 hot) Output Type: Impedance-balanced/unbalanced RF filtered Output Impedance: Balanced 100 ohm unbalanced 50 ohm Max Output: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm) Bandwidth: 20Hz to 20kHz +0.5/-1dB Frequency Response: <10Hz to >50kHz +0.5/-3dB Dynamic Range: Typically >112dB Signal to Noise Ratio: Typically >95dB THD+Noise: <0.003 Interchannel Crosstalk: <-90dB 20Hz to 20kHz Bypass Switch: Bypasses the graphic equalizer section in the signal path Low cut Switch: Activates the 50Hz 12dB/octave high-pass filter Range Switch: Selects either +/- 6dB or +/-12dB slider boost/cut range Operating Voltage: 100-240VAC 50/60Hz Power Consumption: 15W Power Connector: IEC receptacle Unit Weight: 4.8 lbs.(2.2 kg) Shipping Weight: 6.2 lbs.(2.8kg) Dimensions: 1.75″ (4.4cm) H x 6″(15.24cm) D x 19″ (48.26cm) W
CHECK PRICES AT ZZOUNDS
