The Avantone Mixcube Passive Studio Monitors are a pair of high-quality compact monitors that deliver reference-grade audio ideal for mixing and mastering applications. The Avantone Mixcubes feature a wide frequency range (90Hz – 17kHz) the ideal musical range when it comes to referencing most popular music styles. This lets you hear every subtlety that other speakers or monitors may miss. The built-in 60W (RMS) class A/B amplifier helps to drive the monitors delivering exceptional power and audio fidelity in a compact and robust enclosure.

More info…

Compact Robust Design The full range rugged mini-reference monitors feature a cabinet design made from dense MDF for high rigidity and inherent low-resonance characteristics finished with a “retro-cream” Polyurethane high gloss. The Mixcubes also feature high-end nickel plated machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. On the base of each Mixcube there is a 7mm thick neoprene pad to serve as a skid-resistant acoustic isolator. Additionally for creative mounting situations an industry standard 5/8″-27 mic stand mount is fitted into the base. Driver Performance The 5.25″ die cast aluminum frame driver/cone assembly exceeds the performance of the original 5C Sound Cubes. The mounting bezel is then polished for an elegant appearance. The custom designed paper cone is chosen for its musical character and is crafted using the finest New Zealand pulp with mica fibers making it sturdy yet lightweight. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Versatile Positioning The shielded aspect of the Avantone Passive Mixcubes means that they can be placed near a TV or CRT video monitor without causing any problems due to interference. The ideal position for these studio monitors is for them to be kept at ear level and slightly angled towards the engineer. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations. Amplification and Wiring Recommended power rating is 50-200 watts of solid state power or 10-100 watts of tube power. It is advisable to use a high quality studio-grade power amplifier. The metal binding posts on the rear of the speaker can accept bare wire spade lugs or single or dual banana plugs. It is best to use 12 -16 AWG wire for runs longer than 6 feet. Enjoy a smooth transparent top end response and extended bass with the Avantone Mixcubes. This ensures you hear every nuance of the audio as it was intended which is paramount for mixing and mastering applications. The premium-quality components and robust enclosure ensure optimal audio quality as well as standing the test of time. Features 5.25″ Shielded Passive Full range 8 ohm drivers 6 1/2″ Cube Cabinet with multiple coats of “Retro-Cream” High Gloss lacquer finish Precision-milled high-rigidity MDF cabinet sides & baffle for low resonance Radiused corners & edges reduce edge diffraction for better imaging Custom Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity Cloth surround made in Japan to uniform thickness tolerances Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC) High-Rigidity DIE-CAST Aluminum frame with polished mounting bezel Nickel Plated “high-end” binding posts (properly spaced for dual banana plugs) – insulated for CE compliance Anodized aluminum milled terminal plate 1/4″ soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator Standard size (5/8″- 27 threading) female microphone stand mount is built into the cabinet base Specifications System Type: Dynamic Shielded Full-Range Pair Frequency Response: 90Hz – 17000Hz (useful musical range) Impedance: Nominal 8 ohms SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended Power: From 10-200 watts Driver: 5.25″ cast aluminum frame Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing Inputs: 3-way CE rated plastic encased metal binding posts (accepts up to 12-gauge wire spade lugs dual banana plugs) Weight: 6 lbs 11 oz (per speaker) Dimensions: 165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)

The post Avantone Mixcubes Passive Studio Monitors Black (Pair) appeared first on Onthedex.

The Avantone Mixcube Passive Studio Monitors are a pair of high-quality compact monitors that deliver reference-grade audio ideal for mixing and mastering applications. The Avantone Mixcubes feature a wide frequency range (90Hz – 17kHz) the ideal musical range when it comes to referencing most popular music styles. This lets you hear every subtlety that other speakers or monitors may miss. The built-in 60W (RMS) class A/B amplifier helps to drive the monitors delivering exceptional power and audio fidelity in a compact and robust enclosure.

More info…

Compact Robust Design The full range rugged mini-reference monitors feature a cabinet design made from dense MDF for high rigidity and inherent low-resonance characteristics finished with a “retro-cream” Polyurethane high gloss. The Mixcubes also feature high-end nickel plated machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. On the base of each Mixcube there is a 7mm thick neoprene pad to serve as a skid-resistant acoustic isolator. Additionally for creative mounting situations an industry standard 5/8″-27 mic stand mount is fitted into the base. Driver Performance The 5.25″ die cast aluminum frame driver/cone assembly exceeds the performance of the original 5C Sound Cubes. The mounting bezel is then polished for an elegant appearance. The custom designed paper cone is chosen for its musical character and is crafted using the finest New Zealand pulp with mica fibers making it sturdy yet lightweight. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Versatile Positioning The shielded aspect of the Avantone Passive Mixcubes means that they can be placed near a TV or CRT video monitor without causing any problems due to interference. The ideal position for these studio monitors is for them to be kept at ear level and slightly angled towards the engineer. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations. Amplification and Wiring Recommended power rating is 50-200 watts of solid state power or 10-100 watts of tube power. It is advisable to use a high quality studio-grade power amplifier. The metal binding posts on the rear of the speaker can accept bare wire spade lugs or single or dual banana plugs. It is best to use 12 -16 AWG wire for runs longer than 6 feet. Enjoy a smooth transparent top end response and extended bass with the Avantone Mixcubes. This ensures you hear every nuance of the audio as it was intended which is paramount for mixing and mastering applications. The premium-quality components and robust enclosure ensure optimal audio quality as well as standing the test of time. Features 5.25″ Shielded Passive Full range 8 ohm drivers 6 1/2″ Cube Cabinet with multiple coats of “Retro-Cream” High Gloss lacquer finish Precision-milled high-rigidity MDF cabinet sides & baffle for low resonance Radiused corners & edges reduce edge diffraction for better imaging Custom Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity Cloth surround made in Japan to uniform thickness tolerances Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC) High-Rigidity DIE-CAST Aluminum frame with polished mounting bezel Nickel Plated “high-end” binding posts (properly spaced for dual banana plugs) – insulated for CE compliance Anodized aluminum milled terminal plate 1/4″ soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator Standard size (5/8″- 27 threading) female microphone stand mount is built into the cabinet base Specifications System Type: Dynamic Shielded Full-Range Pair Frequency Response: 90Hz – 17000Hz (useful musical range) Impedance: Nominal 8 ohms SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended Power: From 10-200 watts Driver: 5.25″ cast aluminum frame Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing Inputs: 3-way CE rated plastic encased metal binding posts (accepts up to 12-gauge wire spade lugs dual banana plugs) Weight: 6 lbs 11 oz (per speaker) Dimensions: 165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)

The post Avantone Mixcube Passive Studio Monitors Cream (Pair) – Nearly New appeared first on Onthedex.

The Avantone Mixcube Passive Studio Monitors are a pair of high-quality compact monitors that deliver reference-grade audio ideal for mixing and mastering applications. The Avantone Mixcubes feature a wide frequency range (90Hz – 17kHz) the ideal musical range when it comes to referencing most popular music styles. This lets you hear every subtlety that other speakers or monitors may miss. The built-in 60W (RMS) class A/B amplifier helps to drive the monitors delivering exceptional power and audio fidelity in a compact and robust enclosure.

More info…

Compact Robust Design The full range rugged mini-reference monitors feature a cabinet design made from dense MDF for high rigidity and inherent low-resonance characteristics finished with a “retro-cream” Polyurethane high gloss. The Mixcubes also feature high-end nickel plated machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. On the base of each Mixcube there is a 7mm thick neoprene pad to serve as a skid-resistant acoustic isolator. Additionally for creative mounting situations an industry standard 5/8″-27 mic stand mount is fitted into the base. Driver Performance The 5.25″ die cast aluminum frame driver/cone assembly exceeds the performance of the original 5C Sound Cubes. The mounting bezel is then polished for an elegant appearance. The custom designed paper cone is chosen for its musical character and is crafted using the finest New Zealand pulp with mica fibers making it sturdy yet lightweight. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Versatile Positioning The shielded aspect of the Avantone Passive Mixcubes means that they can be placed near a TV or CRT video monitor without causing any problems due to interference. The ideal position for these studio monitors is for them to be kept at ear level and slightly angled towards the engineer. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations. Amplification and Wiring Recommended power rating is 50-200 watts of solid state power or 10-100 watts of tube power. It is advisable to use a high quality studio-grade power amplifier. The metal binding posts on the rear of the speaker can accept bare wire spade lugs or single or dual banana plugs. It is best to use 12 -16 AWG wire for runs longer than 6 feet. Enjoy a smooth transparent top end response and extended bass with the Avantone Mixcubes. This ensures you hear every nuance of the audio as it was intended which is paramount for mixing and mastering applications. The premium-quality components and robust enclosure ensure optimal audio quality as well as standing the test of time. Features 5.25″ Shielded Passive Full range 8 ohm drivers 6 1/2″ Cube Cabinet with multiple coats of “Retro-Cream” High Gloss lacquer finish Precision-milled high-rigidity MDF cabinet sides & baffle for low resonance Radiused corners & edges reduce edge diffraction for better imaging Custom Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity Cloth surround made in Japan to uniform thickness tolerances Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC) High-Rigidity DIE-CAST Aluminum frame with polished mounting bezel Nickel Plated “high-end” binding posts (properly spaced for dual banana plugs) – insulated for CE compliance Anodized aluminum milled terminal plate 1/4″ soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator Standard size (5/8″- 27 threading) female microphone stand mount is built into the cabinet base Specifications System Type: Dynamic Shielded Full-Range Pair Frequency Response: 90Hz – 17000Hz (useful musical range) Impedance: Nominal 8 ohms SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended Power: From 10-200 watts Driver: 5.25″ cast aluminum frame Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing Inputs: 3-way CE rated plastic encased metal binding posts (accepts up to 12-gauge wire spade lugs dual banana plugs) Weight: 6 lbs 11 oz (per speaker) Dimensions: 165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)

The post Avantone Mixcube Passive Studio Monitors Butter Cream (Pair) appeared first on Onthedex.

The Avantone Mixcube Passive Studio Monitors are a pair of high-quality compact monitors that deliver reference-grade audio ideal for mixing and mastering applications. The Avantone Mixcubes feature a wide frequency range (90Hz – 17kHz) the ideal musical range when it comes to referencing most popular music styles. This lets you hear every subtlety that other speakers or monitors may miss. The built-in 60W (RMS) class A/B amplifier helps to drive the monitors delivering exceptional power and audio fidelity in a compact and robust enclosure.

More info…

Compact Robust Design The full range rugged mini-reference monitors feature a cabinet design made from dense MDF for high rigidity and inherent low-resonance characteristics finished with a “retro-cream” Polyurethane high gloss. The Mixcubes also feature high-end nickel plated machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. On the base of each Mixcube there is a 7mm thick neoprene pad to serve as a skid-resistant acoustic isolator. Additionally for creative mounting situations an industry standard 5/8″-27 mic stand mount is fitted into the base. Driver Performance The 5.25″ die cast aluminum frame driver/cone assembly exceeds the performance of the original 5C Sound Cubes. The mounting bezel is then polished for an elegant appearance. The custom designed paper cone is chosen for its musical character and is crafted using the finest New Zealand pulp with mica fibers making it sturdy yet lightweight. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Versatile Positioning The shielded aspect of the Avantone Passive Mixcubes means that they can be placed near a TV or CRT video monitor without causing any problems due to interference. The ideal position for these studio monitors is for them to be kept at ear level and slightly angled towards the engineer. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations. Amplification and Wiring Recommended power rating is 50-200 watts of solid state power or 10-100 watts of tube power. It is advisable to use a high quality studio-grade power amplifier. The metal binding posts on the rear of the speaker can accept bare wire spade lugs or single or dual banana plugs. It is best to use 12 -16 AWG wire for runs longer than 6 feet. Enjoy a smooth transparent top end response and extended bass with the Avantone Mixcubes. This ensures you hear every nuance of the audio as it was intended which is paramount for mixing and mastering applications. The premium-quality components and robust enclosure ensure optimal audio quality as well as standing the test of time. Features 5.25″ Shielded Passive Full range 8 ohm drivers 6 1/2″ Cube Cabinet with multiple coats of “Retro-Cream” High Gloss lacquer finish Precision-milled high-rigidity MDF cabinet sides & baffle for low resonance Radiused corners & edges reduce edge diffraction for better imaging Custom Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity Cloth surround made in Japan to uniform thickness tolerances Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC) High-Rigidity DIE-CAST Aluminum frame with polished mounting bezel Nickel Plated “high-end” binding posts (properly spaced for dual banana plugs) – insulated for CE compliance Anodized aluminum milled terminal plate 1/4″ soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator Standard size (5/8″- 27 threading) female microphone stand mount is built into the cabinet base Specifications System Type: Dynamic Shielded Full-Range Pair Frequency Response: 90Hz – 17000Hz (useful musical range) Impedance: Nominal 8 ohms SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended Power: From 10-200 watts Driver: 5.25″ cast aluminum frame Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing Inputs: 3-way CE rated plastic encased metal binding posts (accepts up to 12-gauge wire spade lugs dual banana plugs) Weight: 6 lbs 11 oz (per speaker) Dimensions: 165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)

The post Avantone Mixcubes Passive Studio Monitors Black (Pair) appeared first on Onthedex.

The Avantone Mixcube Passive Studio Monitors are a pair of high-quality compact monitors that deliver reference-grade audio ideal for mixing and mastering applications. The Avantone Mixcubes feature a wide frequency range (90Hz – 17kHz) the ideal musical range when it comes to referencing most popular music styles. This lets you hear every subtlety that other speakers or monitors may miss. The built-in 60W (RMS) class A/B amplifier helps to drive the monitors delivering exceptional power and audio fidelity in a compact and robust enclosure.

More info…

Compact Robust Design The full range rugged mini-reference monitors feature a cabinet design made from dense MDF for high rigidity and inherent low-resonance characteristics finished with a “retro-cream” Polyurethane high gloss. The Mixcubes also feature high-end nickel plated machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. On the base of each Mixcube there is a 7mm thick neoprene pad to serve as a skid-resistant acoustic isolator. Additionally for creative mounting situations an industry standard 5/8″-27 mic stand mount is fitted into the base. Driver Performance The 5.25″ die cast aluminum frame driver/cone assembly exceeds the performance of the original 5C Sound Cubes. The mounting bezel is then polished for an elegant appearance. The custom designed paper cone is chosen for its musical character and is crafted using the finest New Zealand pulp with mica fibers making it sturdy yet lightweight. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Versatile Positioning The shielded aspect of the Avantone Passive Mixcubes means that they can be placed near a TV or CRT video monitor without causing any problems due to interference. The ideal position for these studio monitors is for them to be kept at ear level and slightly angled towards the engineer. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations. Amplification and Wiring Recommended power rating is 50-200 watts of solid state power or 10-100 watts of tube power. It is advisable to use a high quality studio-grade power amplifier. The metal binding posts on the rear of the speaker can accept bare wire spade lugs or single or dual banana plugs. It is best to use 12 -16 AWG wire for runs longer than 6 feet. Enjoy a smooth transparent top end response and extended bass with the Avantone Mixcubes. This ensures you hear every nuance of the audio as it was intended which is paramount for mixing and mastering applications. The premium-quality components and robust enclosure ensure optimal audio quality as well as standing the test of time. Features 5.25″ Shielded Passive Full range 8 ohm drivers 6 1/2″ Cube Cabinet with multiple coats of “Retro-Cream” High Gloss lacquer finish Precision-milled high-rigidity MDF cabinet sides & baffle for low resonance Radiused corners & edges reduce edge diffraction for better imaging Custom Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity Cloth surround made in Japan to uniform thickness tolerances Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC) High-Rigidity DIE-CAST Aluminum frame with polished mounting bezel Nickel Plated “high-end” binding posts (properly spaced for dual banana plugs) – insulated for CE compliance Anodized aluminum milled terminal plate 1/4″ soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator Standard size (5/8″- 27 threading) female microphone stand mount is built into the cabinet base Specifications System Type: Dynamic Shielded Full-Range Pair Frequency Response: 90Hz – 17000Hz (useful musical range) Impedance: Nominal 8 ohms SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended Power: From 10-200 watts Driver: 5.25″ cast aluminum frame Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing Inputs: 3-way CE rated plastic encased metal binding posts (accepts up to 12-gauge wire spade lugs dual banana plugs) Weight: 6 lbs 11 oz (per speaker) Dimensions: 165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)

The post Avantone Mixcube Passive Studio Monitors Cream (Pair) – Nearly New appeared first on Onthedex.

The Avantone Mixcube Passive Studio Monitors are a pair of high-quality compact monitors that deliver reference-grade audio ideal for mixing and mastering applications. The Avantone Mixcubes feature a wide frequency range (90Hz – 17kHz) the ideal musical range when it comes to referencing most popular music styles. This lets you hear every subtlety that other speakers or monitors may miss. The built-in 60W (RMS) class A/B amplifier helps to drive the monitors delivering exceptional power and audio fidelity in a compact and robust enclosure.

More info…

Compact Robust Design The full range rugged mini-reference monitors feature a cabinet design made from dense MDF for high rigidity and inherent low-resonance characteristics finished with a “retro-cream” Polyurethane high gloss. The Mixcubes also feature high-end nickel plated machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. On the base of each Mixcube there is a 7mm thick neoprene pad to serve as a skid-resistant acoustic isolator. Additionally for creative mounting situations an industry standard 5/8″-27 mic stand mount is fitted into the base. Driver Performance The 5.25″ die cast aluminum frame driver/cone assembly exceeds the performance of the original 5C Sound Cubes. The mounting bezel is then polished for an elegant appearance. The custom designed paper cone is chosen for its musical character and is crafted using the finest New Zealand pulp with mica fibers making it sturdy yet lightweight. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Versatile Positioning The shielded aspect of the Avantone Passive Mixcubes means that they can be placed near a TV or CRT video monitor without causing any problems due to interference. The ideal position for these studio monitors is for them to be kept at ear level and slightly angled towards the engineer. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations. Amplification and Wiring Recommended power rating is 50-200 watts of solid state power or 10-100 watts of tube power. It is advisable to use a high quality studio-grade power amplifier. The metal binding posts on the rear of the speaker can accept bare wire spade lugs or single or dual banana plugs. It is best to use 12 -16 AWG wire for runs longer than 6 feet. Enjoy a smooth transparent top end response and extended bass with the Avantone Mixcubes. This ensures you hear every nuance of the audio as it was intended which is paramount for mixing and mastering applications. The premium-quality components and robust enclosure ensure optimal audio quality as well as standing the test of time. Features 5.25″ Shielded Passive Full range 8 ohm drivers 6 1/2″ Cube Cabinet with multiple coats of “Retro-Cream” High Gloss lacquer finish Precision-milled high-rigidity MDF cabinet sides & baffle for low resonance Radiused corners & edges reduce edge diffraction for better imaging Custom Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity Cloth surround made in Japan to uniform thickness tolerances Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC) High-Rigidity DIE-CAST Aluminum frame with polished mounting bezel Nickel Plated “high-end” binding posts (properly spaced for dual banana plugs) – insulated for CE compliance Anodized aluminum milled terminal plate 1/4″ soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator Standard size (5/8″- 27 threading) female microphone stand mount is built into the cabinet base Specifications System Type: Dynamic Shielded Full-Range Pair Frequency Response: 90Hz – 17000Hz (useful musical range) Impedance: Nominal 8 ohms SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended Power: From 10-200 watts Driver: 5.25″ cast aluminum frame Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing Inputs: 3-way CE rated plastic encased metal binding posts (accepts up to 12-gauge wire spade lugs dual banana plugs) Weight: 6 lbs 11 oz (per speaker) Dimensions: 165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)

The post Avantone Mixcube Passive Studio Monitors Butter Cream (Pair) appeared first on Onthedex.

The Behringer 1C Studio Monitors combine a sophisticated aesthetic design with exceptionally accurate audio reproduction. Supplied in a pair, the 1C passive monitors feature clip terminal connectors and are capable of handling 25W continuous power/100W peak power. The included bracket provides versatile positioning options and allows you to mount the monitors to walls or ceilings.

More info…

Premium Components
The Behringer 1C monitors provide the user with highly accurate sound reproduction due to its powerful 5.5″ cellulose cone woofers that provide deep clean bass and its high-resolution 0.5 tweeters providing top end clarity. When combined with a phase-optimised high-precision crossover, these drivers deliver absolute phase linearity, stunning audio reproduction, and an ultra-linear frequency response from 60Hz all the way up to 23kHz.

Multi-Purpose Monitors
The Behringer 1C Studio Monitors are ideal for a wide range of applications. They can be suited to your surround sound systems, ensuring an immersive movie watching experience. You can even use them in your home recording studio for producing music. The compact design allows them to be placed anywhere from your studio desktop to your bookshelves without taking up too much space.

Features:
– Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production, and surround-sound systems
– High power handling capability produces full-range output with extremely low distortion
– Powerful 5.5″ woofer with extremely lightweight cellulose cone and high-resolution 0.5″ tweeter
– Ultra-linear frequency range from 60 Hz to 23 kHz
– Phase-optimized and high-precision crossover for absolute phase linearity
– Auto-overload protection prevents tweeter damage and resets automatically
– Bracket for wall/ceiling mounting included
– Designed and engineered in Germany

Specifications:
– Woofer: 5.5″
– Tweeter Size: 0.5″
– Power Capacity: 25W RMS / 100W Peak
– Impedance: 4 Ohms
– Frequency Range: 60Hz to 23kHz -10dB
– Crossover Frequency: 5kHz
– Sound Pressure Level: 86dB Nominal
– Connector Terminal: Clip Terminal
– Wire Diameter: N/A

The post Behringer 1C-BK Studio Monitors Black appeared first on Onthedex.