The post Rode RS-1 Charging Base for TX-M2 and LB-1 appeared first on Onthedex.
]]>
Easily charge your RS-1 microphone with this rugged charging point. The Rode RS-1 Charging Base for TX-M2 and LB-1 features room to charge both a TX-M2 handheld microphone and the LB-1 battery. It features a locking power connector which keeps things in place. It won’t be in the dock for long though – it only takes four hours charge from flat.
Great for cycling out battery units – meaning you’ll always be ready to perform. Please note: The charging station does not come with the TX-M2 microphone or an LB-1 battery.
Gets the job done. Charge your TX-M2 microphone and LB-1 rechargeable lithium-ion battery with ease. This well-designed charging unit is the best way to get them both powered up. When performers are busy, their microphones can take a beating. After a night performance, your microphone’s battery is probably totally worn out. Therefore it’s important to get them charged back up as quickly and efficiently as possible.
Even though the batteries for these units are large – up to ten hours of playtime – they can be charged up very quickly with the RS-1. Two hours for the microphone and four hours for the battery. It’s sleek, compact, unobtrusive, and is designed to last – its rugged construction handling most of what you throw at it.
Features:
– AC-powered recharge station
– Locking power connector
– Recharge time from flat: LB-1 (2 hours); TX-M2 (4 hours)
– Recharges two devices at once
– Stable platform
Specifications:
– Charge Current: TX-M2 – 420mA, LB-1 – 1.5 A
– Charge Time: TX-M2 – 4 hours, LB-1 – 2 hours
– External Power Supply: 15V 1A DC Power Pack
– Power Requirements: 15V DC 1 A max
– Weight: 375g (13 oz.)
– Dimensions (W×L×H mm): 162 x 332 x 75
CHECK PRICES AT ZZOUNDS
The post Rode RS-1 Charging Base for TX-M2 and LB-1 appeared first on Onthedex.
]]>The post Shure PS43 Power Supply appeared first on Onthedex.
]]> 
Energy-efficient external switching mode 15V DC power supply is available for use with GLXD4, GLXD4+, ULXS4, ULXP4, ULXD4, P9T, PS9, SBC-DC, and AXT610. This power supply is designed to provide reliable and consistent power to your devices.
For more information on this power supply, you can click on the following link: More info…
It is important to note that this power supply is the official Shure PSU for GLXD4, GLXD4+, ULXS4, ULXP4, and ULXD.
CHECK PRICES AT ZZOUNDS
The post Shure PS43 Power Supply appeared first on Onthedex.
]]>The post Shure PS24 Power Supply appeared first on Onthedex.
]]> 
Energy-efficient external switching mode 12V DC power supply for use with:
– BLX4
– BLX88
– BLX4R
– GLXD6
– UABiasT
– PG4
– PGX4
– PGXD4
– SLX 4
– SLX4L
– P2T
– FP33
– QLXD4
– SVX4
– SVX88
– KCX4
– KCX88
– P3T
– PSM
More info…
Features/Specifications
– AC Input Voltage: 100-240V 50-60Hz
– DC Output Voltage: 12V
– DC Current: 400mA
– Tip & Center: Positive
– Type: External In-Line
– Cable Length input cord: 183m
– Calbe Length output cord: 183m
CHECK PRICES AT ZZOUNDS
The post Shure PS24 Power Supply appeared first on Onthedex.
]]>The post Zoom BCQ-2n Battery Case for Q2N appeared first on Onthedex.
]]> 
The Zoom BCQ-2n is a custom designed battery compartment for the Q2n and Q2n 4K video recorder modules. The battery compartment attaches to the bottom of the Q2n recorder with a threaded bolt the bottom has a threaded hole so you can still mount the Q2n and BCQ-2n to a handy recorder mount. The BCQ-2n runs on four additional AA batteries and allows the user to extend their recording time by up to four hours depending on battery type and usage. This is an essential item for any owner of the Zoom Q2n or Q2n 4K.
Specifications Rated output: DC 5V 1.0A (USB type A) Power supply: 4 x AA batteries Supported battery types: Alkaline LR6 (1.5V) Ni-MH rechargeable HR6 (1.2 V) Lithium FR6 (1.5V) External dimensions: 51.5 mm (D) × 64.5 mm (W) × 47.8 mm (H) Weight: 67 g Included items: BCQ-2n unit Micro USB cable Operation Manual Compatible with: Q2n and Q2n-4K Product code: 10004727
CHECK PRICES AT ZZOUNDS
The post Zoom BCQ-2n Battery Case for Q2N appeared first on Onthedex.
]]>The post Zoom AD14 Power Supply for H4N appeared first on Onthedex.
]]> 
The Zoom AD14 Power Supply is a AC power adapter designed for use with the Zoom H4N Handy Recorder. The Zoom AD14 is also compatible with a range of other Zoom products including: ARQ AR-96 H4n Pro R16 R24 Q3 or Q3HD. It can also be used as a replacement/spare power supply while on the move.
Specifications Rated Input: AC100 – 240V Rated Output: DC5V / 1A (center positive) Compatible With: ARQ AR-96 H4n H4n Pro Q3 Q3HD R16 R24
CHECK PRICES AT ZZOUNDS
The post Zoom AD14 Power Supply for H4N appeared first on Onthedex.
]]>