The Behringer iNUKE NU3000DSP Power Amp is a two channel amplifier that offers up to 3000 watts of Class-D power. It can deliver 2 x 1500 watts at 2 ohms, 2 x 900 watts at 4 ohms, and 3000 watts at 4 ohms in Bridge mode. This amplifier is designed to be lightweight and rack-mountable. It features integrated DSP signal processing, allowing you to optimize your sound for any performance scenario. The Gain controls have signal LEDs, providing at-a-glance feedback and reliable performance.

For more information, click here.

Thanks to Behringer’s revolutionary Class-D technology, the iNUKE NU3000DSP Power Amp delivers massive power and incredible sonic performance. It remains user-friendly and portable. Class-D amplification provides energy efficiency and eliminates the need for heavy power supplies and large heat sinks. The front panel controls and indicators allow for easy monitoring of the system’s status. The Gain controls have signal LEDs that light up when a signal is present, and clip LEDs indicate when the signal is distorted and need to be adjusted.

The Behringer NU3000DSP features a built-in DSP section and high-quality converters, ensuring exceptional signal integrity and a broad dynamic range. The DSP functions include delay for loudspeakers, a crossover, an 8-band parametric EQ, and a 2-band dynamic EQ. The front panel LCD display allows you to set up and make adjustments directly on the amplifier without needing a PC. The iNUKE NU3000DSP can also be controlled and monitored via USB connection to a computer.

The amplifier can be set up, controlled, and monitored via the front panel or a computer using the iNuke Remote Connect software. This software provides access to advanced amplifier control and allows for preset configurations for different performance scenarios. The amplifier features “Zero-Attack” limiters for maximum output level with reliable overload protection. It also has a built-in subwoofer/satellite crossover for optimal subwoofer operation. The amplifier is designed with independent protection for DC LF and thermal overload on each channel.

The iNUKE NU3000DSP Power Amp is designed and engineered in Germany. It has a sturdy construction with professional twist-lock speaker connectors for reliable operation. The “back-to-front” ventilation system prevents thermal buildup. The amplifier has multiple inputs and outputs, including XLR and 1/4 TRS combination input connectors. It is protected with thermal and DC protection, ensuring the safety of both the amplifier and speakers. The power supply is compatible with 220V – 240V and has a standard IEC receptacle. The amplifier weighs 5.4kg and has dimensions of 89mm x 483mm x 328mm (H x W x D).

Output Power:
– Stereo Output:
– 4 Ohms Per Channel: 2 x 3100W
– 8 Ohms Per Channel: 2 x 1600W

Digital Signal Processing:
– Display: LCD 128 x 32 Amber Backlit
– Digital Delay Function: 0ms – 300ms (Per Channel)
– Digital Crossover Function: 3 Filter Types up to 48dB/Octave
– Digital EQ Function: 8-Band Parametric 2-Band Dynamic Equalizer
– Presets: 20 Total Presets 19 User-Definable

The post Behringer iNUKE NU3000DSP Power Amp appeared first on Onthedex.

Selling your equipment to Gear4music is straightforward. Just click “Trade-in your gear” above and answer some quick questions about your item. We’ll tell you how much you’ll get before you sell. We’ll arrange to collect the item from you, ensuring its journey to us is fully insured. Once we receive your gear, we’ll let you know. When the item has been checked and verified, within a few days you’ll get paid! Selling to us also means you don’t have to write product listings or answer questions from potential buyers.

Class-D Amplification Technology
The iNUKE NU6000DSP features a whole array of professional components designed to offer the highest quality audio and performance possible. The Class-D amplifier technology incorporated into this amp was developed to deliver exceptional sonic performance whilst not being a drain on resources and power. Eliminating the need for heavy power supply and big heat sinks, the Class-D amplifier provides optimal audio quality while using less energy and protecting components.

Easy-To-Use Design And Exceptional Functionality
Monitoring is made easy with the NU6000DSP, with the front pane controls and indicators implemented to show vital system information at a glance. All channels have positive-detent Gain controls with Signal LEDs for added versatility over your functions and volume levels. Also featured are Clip LEDs signifying when the signal is distorted, so you can reduce the appropriate input signal to deliver a clear and high-quality sound. The rear panel features XLR and 1/4 TRS input connectors for exceptional connectivity options, letting you connect to virtually any source. Twist-lock speaker sockets also ensure that connections are held in place, providing increased stability and making sure you get every bit of power translated to your loudspeakers.

USB Connection
One of the most unique features of the NU6000DSP is the USB connection capabilities. You can control and monitor your unit using your computer via the USB connection, giving you expanded control options. The iNUKE Remote Connect Software (available from the Behringer website) is the ideal solution for managing installed system presets and more.

iNUKE DSP
The built-in DSP and 24-bit/86 kHz converters deliver the best possible signal integrity with a broad dynamic range. There are also a range of functions provided with the built-in DSP, including delay, crossover, EQ (8 parametric, 2 dynamic), and dynamics processing. The front panel LCD conveniently displays all the information you need to make adjustments to your amplifier without the need for a computer.

Features
– Delivers 2 x 3100 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms, and weighs less than 12 lbs / 5.5 kg
– Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup
– Ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption
– High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
– Front panel LCD display enables setup and adjustment without PC
– Can be set up, controlled, and monitored via front panel USB connector
– Powerful remote software downloadable at behringer.com
– “Zero-Attack” limiters offer maximum output level with reliable overload protection
– Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
– Detented and illuminated gain controls for precise level setting
– Precise 4-segment Signal and Limit LEDs to monitor performance
– XLR and 1/4 TRS combination input connectors for compatibility with any source
– Professional twist-lock speaker connectors for ultimate reliability
– Independent DC LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
– “Back-to-front” ventilation system prevents thermal buildup for reliable operation
– High-quality components and exceptionally rugged construction ensure long life

Specifications
– Stereo 8 Ohm Per Channel: 1600W
– 4 Ohm Per Channel: 3100W
– Controls: Power Gain DSP Section Rotary Push-Encoder Buttons For Process Setup Up/Down Exit
– Indicators: Power Amber Backlit Illuminated Gain Controls Limit (Per Channel): 0 dB Full Scale Signal (Per Channel): -24 -12 -6 dB
– Digital Signal Processing Display: LCD 128 x 32 Amber Backlit Display Delay Function (Per Channel): 0-300 ms Digital Crossover Function: 3 Filter Types Up To 48 dB/Octave Digital EQ Function (Per Channel): 8-Band Parametric 2-Band Dynamic Equalizer Digital Dynamics Function (Per Channel): Zero Attack Limiter (Peak) Presets: 20 Total Presets 19 User-Definable
– Inputs: 2 x Combo Jacks
– Input Impedance: 10k Ohm Unbalanced, 20k Ohm Balanced
– Outputs: 2 x Locking-Style Professional Speaker Connectors
– Output Circuit Type: Class D
– Distortion: 140 @ 8 Ohm
– Signal-To-Noise: >98 dB
– USB: Front Panel USB Connector Type B For Remote Control Of DSP Section
– Cooling Protection: Continuously Variable Speed Fan Back-To-Front Air Flow
– Amplifier Protection: Thermal and DC Protection Stable Into Reactive Or Mismatched Loads
– Load Protection: On/Off Muting DC-Fault
– Power Supply Shutdown Power Supply
– USA/Canada: 120V 60Hz
– UK/Australia/Europe: 220-240V 50/60Hz
– Korea/China: 220-240V 50/60Hz
– Japan: 100V 50/60Hz
– Power Consumption @ 4 Ohm: 620W
– Mains Connector: Standard IEC Receptacle
– Weight: 5.4 kg
– Dimensions: Height: 89 mm, Width: 483 mm, Depth: 328 mm

The post Behringer iNUKE NU6000DSP Power Amp appeared first on Onthedex.

Selling your equipment to Gear4music is straightforward. Just click “Trade-in your gear” above and answer some quick questions about your item. We’ll tell you how much you’ll get before you sell. We’ll arrange to collect the item from you, ensuring its journey to us is fully insured. Once we receive your gear, we’ll let you know. When the item has been checked and verified within a few days, you’ll get paid! Selling to us also means you don’t have to write product listings or answer questions from potential buyers.

Class-D – Massive Power Perfect Sound: Behringer’s revolutionary Class-D amplifier technology allows the iNUKE NU3000 to deliver enormous power and outstanding sonic performance in an intuitive and lightweight package. Class-D amplification ensures energy efficiency while eliminating the need for heavy power supplies and heat sinks. This technology makes it possible to design and build extremely powerful products that are easy-to-use and significantly lighter in weight than their traditional counterparts.

Intuitive Operation: The front panel controls and indicators allow you to instantly monitor the system’s status at a glance. Both channels feature positive-detent Gain controls with signal LEDs that light when a signal is present, as well as clip LEDs that indicate when the signal is distorted and you need to reduce the input signal. The Behringer NU3000’s rear panel has combo XLR and 1/4 TRS input connectors, which allow you to connect virtually any source, balanced or unbalanced.

Features: Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode). Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup. Ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption. “Zero-Attack” limiters offer maximum output level with reliable overload protection. Built-in Subwoofer/Satellite crossover for perfect subwoofer operation. Detented and illuminated gain controls for precise level setting. Precise 4-segment Signal and Limit LEDs to monitor performance. XLR and 1/4 TRS combination input connectors for compatibility with any source. Professional twist-lock speaker connectors for ultimate reliability. Independent DC LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show. “Back-to-front” ventilation system prevents thermal buildup for reliable operation. High-quality components and exceptionally rugged construction ensure long life.

Specifications:
– Front Controls: Power Switch, Gain Controls (Channel A and B).
– Rear Controls: Mode Switch (Bridge/Stereo/Mono), Crossover Switch (LF/Fullrange/HF).
– Indicators: Power (Amber/Red Backlit), Illuminated Gain Controls, Limit (0dBFS per channel), Signal (-24dBFS -12dBFS -6dBFS per channel).
– Input Sensitivity: 0.775V (0dBu).
– Input Connectors: 2 x XLR/TRS Combo Jacks.
– Input Impedance: 10kΩ unbalanced/20kΩ balanced.
– Output Connectors: 2 x Locking-Style Speaker Connectors.
– Output Circuit Type: Class-D.
– Frequency Response: 20Hz – 20kHz +0dB/-1dB.
– Signal-to-Noise Ratio: >100dB.
– Power Connector: Standard IEC.
– Dimensions: 89mm x 483mm x 248mm / 3.5″ x 19″ x 9.8″ (H x W x D).
– Weight: 3kg / 6.6lbs.

Output Power:
– Stereo Output: 2Ω Per Channel: 2 x 1500W, 4Ω Per Channel: 2 x 880W, 8Ω Per Channel: 2 x 440W.
– Bridged Mono Output: 4Ω: 3000W, 8Ω: 1520W.

The post Behringer iNUKE NU3000 Power Amp appeared first on Onthedex.

The Dynacord SL 2400 is a dual 1200 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 1200 W or less, the SL 2400 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system.

The SL 2400 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean, clear amplification. The SL 2400 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound. The SL 2400 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 1200 W power amplifier for powering passive PA speakers
– Three impedance options from 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 1800 W at 2 ohms, 1200 W at 4 ohm, and 750 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power THD = 1% 1 kHz: 1800 W (@ 2 ohm load impedance), 1200 W (@ 4 ohm load impedance), 750 W (@ 8 ohm load impedance)
– Rated Output Power THD < 0.1% 20 Hz to 20 kHz: 1100 W (@ 4 ohm load impedance), 550 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Dynamic-Headroom IHF-A: 3400 W (@ 2 ohm load impedance), 1800 W (@ 4 ohm load impedance), 950 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Continuous 1 kHz: 2400 W (@ 2 ohm load impedance), 1500 W (@ 4 ohm load impedance), 850 W (@ 8 ohm load impedance)
– Maximum Bridged Output Power THD = 1% 1 kHz: 3600 W (@ 4 ohm load impedance), 2400 W (@ 8 ohm load impedance)
– Maximum RMS Voltage Swing THD = 1% 1 kHz: 90.6 V
– Power Bandwidth THD = 1% ref. 1 kHz half power @ 4 ohm: < 10 Hz to 30 kHz
– Voltage Gain ref. 1 kHz: 32.0 dB
– Input Sensitivity rated power @ 8 ohm 1 kHz: +6.6 dBu (1.66 V RMS)
– THD at rated Output Power MBW = 80 kHz 1 kHz: < 0.03%
– IMD-SMPTE 60 Hz 7 kHz: < 0.1%
– DIM30 3.15 kHz 15 kHz: < 0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk ref. 1 kHz at rated output power: 300
– Slew Rate: 30 V/µs
– Signal to Noise Ratio A-weighted: > 110 dB
– Output Noise A-weighted: < -71 dBu
– Output Stage Topology: Class H
– Power Requirements: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption 1/8 maximum output power @ 4 ohm: 850 W
– Mains Fuse: 240 V / 230 V: T15AH; 120 V / 100 V: T30AH
– Protection: Audio limiters, High temperature, DC, HF Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 17.7 kg (39.0 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 2400 2 x 1200W Power Amp appeared first on Onthedex.

The Dynacord SL 900 is a dual 450 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 450 W or less, the SL 900 is a stable and reliable amp for mobile and installation sound alike.

The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system. The SL 900 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean clear amplification: The SL 900 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact, but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound: The SL 900 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 450 W power amplifier for powering passive PA speakers
– Three impedance options from 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 650 W at 2 ohms, 450 W at 4 ohm, and 270 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power THD = 1%, 1 kHz:
– Dual Channel: 650 W (@ 2ohm load impedance), 450 W (@ 4ohm load impedance), 270 W (@ 8ohm load impedance)
– Rated Output Power THD < 0.1%, 20 Hz to 20 kHz:
– 400 W (@ 4ohm load impedance), 200 W (@ 8ohm load impedance)
– Maximum Single Channel Output Power Dynamic-Headroom IHF-A:
– 1150 W (@ 2ohm load impedance), 660 W (@ 4ohm load impedance), 350 W (@ 8ohm load impedance)
– Maximum Single Channel Output Power Continuous 1 kHz:
– 850 W (@ 2ohm load impedance), 540 W (@ 4ohm load impedance), 310 W (@ 8ohm load impedance)
– Maximum Bridged Output Power THD = 1%, 1 kHz:
– 1300 W (@ 4ohm load impedance), 900 W (@ 8ohm load impedance)
– Maximum RMS Voltage Swing THD = 1%, 1 kHz: 55.3 V
– Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4ohm: < 10 Hz to 30 kHz
– Voltage Gain ref. 1 kHz: 32.0 dB
– Input Sensitivity rated power @ 8ohm, 1 kHz: +2.2 dBu (1.0 V RMS)
– THD at rated Output Power MBW = 80 kHz, 1 kHz: < 0.03%
– IMD-SMPTE 60 Hz, 7 kHz: < 0.1%
– DIM30 3.15 kHz, 15 kHz: < 0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk ref. 1 kHz at rated output power: 300
– Slew Rate: 25 V/µs
– Signal to Noise Ratio A-weighted: > 106 dB
– Output Noise A-weighted: < -71 dBu
– Output Stage Topology: Class H
– Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption 1/8 maximum output power @ 4 ohm: 550 W
– Mains Fuse: 240 V / 230 V: T10AH; 120 V / 100 V: T20AH
– Protection: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 12.6 kg (27.8 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 900 2 x 450W Power Amp appeared first on Onthedex.

The Dynacord SL 1200 is a dual 600 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 600 W or less, the SL 1200 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system. The SL 1200 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean, clear amplification: The SL 1200 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound: The SL 1200 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 600 W power amplifier for powering passive PA speakers
– Three impedance options – 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 900 W at 2 ohms, 600 W at 4 ohm, and 380 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power THD = 1% 1 kHz: 900 W (@ 2 ohm load impedance), 600 W (@ 4 ohm load impedance), 380 W (@ 8 ohm load impedance)
– Rated Output Power THD < 0.1% 20 Hz to 20 kHz: 500 W (@ 4 ohm load impedance), 250 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Dynamic-Headroom IHF-A: 1700 W (@ 2 ohm load impedance), 950 W (@ 4 ohm load impedance), 480 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Continuous 1 kHz: 1200 W (@ 2 ohm load impedance), 750 W (@ 4 ohm load impedance), 420 W (@ 8 ohm load impedance)
– Maximum Bridged Output Power THD = 1% 1 kHz: 1800 W (@ 4 ohm load impedance), 1200 W (@ 8 ohm load impedance)
– Maximum RMS Voltage Swing THD = 1% 1 kHz: 65.1 V
– Power Bandwidth THD = 1% ref. 1 kHz half power @ 4 ohm: < 10 Hz to 30 kHz
– Voltage Gain ref. 1 kHz: 32.0 dB
– Input Sensitivity rated power @ 8 ohm 1 kHz: +3.1 dBu (1.11 V RMS)
– THD at rated Output Power MBW = 80 kHz 1 kHz: < 0.03%
– IMD-SMPTE 60 Hz 7 kHz: < 0.1%
– DIM30 3.15 kHz 15 kHz: < 0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk ref. 1 kHz at rated output power: 300
– Slew Rate: 26 V/µs
– Signal to Noise Ratio A-weighted: > 107 dB
– Output Noise A-weighted: < -71 dBu
– Output Stage Topology: Class A/B
– Power Requirements: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption 1/8 maximum output power @ 4 ohm: 700 W
– Mains Fuse: 240 V / 230 V: T12AH; 120 V / 100 V: T25AH
– Protection: Audio limiters, High temperature, DC, HF Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 14.8 kg (32.6 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 1200 2 x 600W Power Amp appeared first on Onthedex.

The Dynacord SL 1800 is a dual 900 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 900 W or less, the SL 1800 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system. The SL 1800 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves the frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean, clear amplification. The SL 1800 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact, but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound. The SL 1800 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 900 W power amplifier for powering passive PA speakers
– Three impedance options – 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 1250 W at 2 ohms, 900 W at 4 ohm, and 550 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power: THD = 1%, 1 kHz
– Dual Channel: 1250 W (@ 2 ohm load impedance)
– 900 W (@ 4 ohm load impedance)
– 550 W (@ 8 ohm load impedance)
– Rated Output Power: THD < 0.1%, 20 Hz to 20 kHz
– 800 W (@ 4 ohm load impedance)
– 400 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power:
– Dynamic-Headroom IHF-A:
– 2450 W (@ 2 ohm load impedance)
– 1400 W (@ 4 ohm load impedance)
– 700 W (@ 8 ohm load impedance)
– Continuous 1 kHz:
– 1700 W (@ 2 ohm load impedance)
– 1100 W (@ 4 ohm load impedance)
– 630 W (@ 8 ohm load impedance)
– Maximum Bridged Output Power: THD = 1%, 1 kHz
– 2800 W (@ 4 ohm load impedance)
– 1800 W (@ 8 ohm load impedance)
– Maximum RMS Voltage Swing: THD = 1%, 1 kHz: 78.8 V
– Power Bandwidth: THD = 1%, ref. 1 kHz, half power @ 4 ohm:
– <10 Hz to 30 kHz
– Voltage Gain: ref. 1 kHz: 32.0 dB
– Input Sensitivity: rated power @ 8 ohm, 1 kHz: +5.1 dBu (1.39 V RMS)
– THD at rated Output Power: MBW = 80 kHz, 1 kHz: <0.03%
– IMD-SMPTE 60 Hz, 7 kHz: <0.1%
– DIM30 3.15 kHz, 15 kHz: <0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk, ref. 1 kHz at rated output power: 300
– Slew Rate: 27 V/µs
– Signal to Noise Ratio, A-weighted: >109 dB
– Output Noise, A-weighted: <-71 dBu
– Output Stage Topology: Class H
– Power Requirements: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption, 1/8 maximum output power @ 4 ohm: 700 W
– Mains Fuse:
– 240 V / 230 V: T15AH
– 120 V / 100 V: T25AH
– Protection: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 16.3 kg (35.9 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 1800 2 x 900W Power Amp appeared first on Onthedex.

All the power you need to get your talent heard. The Samson SXD3000 Power Amplifier offers huge output crystal clear audio and advanced control for a variety of pro-level performance and installation speaker configurations. Meticulously engineered for clean impactful sound youll get low distortion and wide dynamic range across an extended frequency response. Great sound doesnt have to be difficult and the SXD3000 is proof. Utilising advanced DSP technology you have full control of your audio. From Crossover management to EQ shaping the SXD3000 has all the tools you need to get the best from your speaker system. With fully-editable presets on board you can get to work in minutes no matter what the setting. Precision and practicality. All in one unit. Monitor your levels with ease thanks to multi-segment LED metering on each channel. No matter what volume you need individual level controls allow you to accurately set gain and sensitivity for the clearest audio possible. All from a unit that fits neatly into a dual rack space. Live sound has never been this easy.

More info…

Clear audio guaranteed Impressive power. Unrivalled performance. The SXD3000 is an ideal choice for front of house engineers and installers. With a huge 450W per side at 4 ohms you’ll get clear impactful sound delivered directly to your installation and performance speaker systems. The SXD3000 is specially engineered for minimal distortion. Utilising an extended frequency range of 20Hz – 20kHz you’ll get accurate audio reproduction with a wide dynamic range. That means professional-quality sound without the effort. Ultimate control A perfect combination of power and precision. Take control of your sound with the SXD3000’s digital DSP interface. Designed to push the boundaries of value performance and reliability the advanced DSP offers a wide range of editable parameters for the best sound possible. Discover high and low pass filters a 3-band EQ output limiter and delay time for speaker alignment. Set up in minutes thanks to four customisable presets created to provide optimal settings for various speaker configurations. It’s as easy as plug in and play. The highest standard of reliability Built for the most demanding environments. Engineer your sound with confidence thanks to the SXD3000’s multi-stage protection. Your power amp is fully protected against power-up over-heating over-current short circuit low output impedance and DC voltage. You’ll get maximum performance night after night. With an all-steel chassis you’ll never have to worry about damages getting in the way of your show. Features Professional-quality power supply for your passive speaker systems Best-in-class performance with advanced DSP control including Crossover Filter EQ Limiter Delay and more Suitable for most performance and installation speaker configurations Huge power with 450W per side at four ohms Crystal clear audio guaranteed with minimal distortion across a 20Hz – 20kHz frequency range Fully customisable presets for a range of applications including DJ live sound and commercial installations Easy-to-navigate front panel with backlit LCD screen Monitor your levels with precision thanks to a multi-segment LED meter on each channel Connect to any setup with XLR and 1/4” inputs binding post and Speakon ouputs Fits neatly into any 19” rack with a dual rack space design Specifications Rated Output Power Stereo (both channel driven @ 8-ohms): 300W Rated Output Power Stereo (both channel driven @ 4-ohms): 450W Signal to Noise Ratio (20Hz-20k): 100dB Input sensitivity @ 8-ohms Voltage Gain: 5dBu Voltage Gain @ 8-ohm: 30dB Output Circuitry: AB Current Consumption (115VAC/230VAC) @1/8 rated power 4ohms: 4.5A / 6.6A Current Consumption (115VAC/230VAC) @1/3 rated power 4ohms: 7.2A / 10A Current Consumption (115VAC/230VAC) @ rated power 4ohms max: 10A / 15.9A Distortion (typical @ 4-ohms): 0.02 Frequency Response @ 8-ohms 1Watt: 0/-1dB: 20Hz-20kHz Damping Factor (400Hz): 120 Input Impedance: 20K ohm (balanced) 10Vrms (22dBu) Cooling: Continuously variable speed fan cooling Connectors (each channel): 3-pin XLR and 1/4” TRS balanced (inputs) Binding post and Speakon® (outputs) Controls: Power switch CH A & CH B volume DSP Controls: UP DOWN BACK buttons & EDIT encoder/button Indicators: Signal -20dB -10dB Limit Thermal Protection: Short Circuit Open Circuit Thermal RF protection Load protected against DC faults DSP Display: 2×16 Character LCD DSP Modes: Manual mode 2 Full Range Mono 2-Way Sub/Sat 2 Subs DSP I/O Setting: Stereo Mono A+B Dual Mono A+B Link Parallel A Dual Parallel A Link DSP Digital Dynamics Function: Filter Crossover Gain Offset EQ Limiter DSP Digital Delay Function: Max 20ms per channel DSP Digital EQ Function per Channel: f0: 1/12 Octave at 20 20kHz Gain: +/- 12dB Q: 0.5 5.0 Presets: DJ Vocal Live Sound Install Rock Dance and Jazz DSP Setup: Lock Controls with Code Factory Reset Dimensions (L x W x H): 19” x 13” x 3.5” (482mm x 330mm x 88mm) Net Weight: 26.4lbs / 12kg

The post Samson SXD3000 Power Amplifier appeared first on Onthedex.

All the power you need to get your talent heard. The Samson SXD5000 Power Amplifier offers huge output crystal clear audio and advanced control for a variety of pro-level performance and installation speaker configurations. Meticulously engineered for clean impactful sound youll get low distortion and wide dynamic range across an extended frequency response. Great sound doesnt have to be difficult and the SXD5000 is proof. Utilising advanced DSP technology you have full control of your audio. From Crossover management to EQ shaping the SXD5000 has all the tools you need to get the best from your speaker system. And with fully-editable presets on board you can get to work in minutes no matter what the setting. Precision and practicality. All in one unit. Monitor your levels with ease thanks to multi-segment LED metering on each channel. No matter what volume you need individual level controls allow you to accurately set gain and sensitivity for the clearest audio possible. All from a unit that fits neatly into a dual rack space. Live sound has never been this easy.

More info…

Clear audio guaranteed Impressive power. Unrivalled performance. The SXD5000 is an ideal choice for front of house engineers and installers. With a huge 750W per side at 4 ohms you’ll get clear impactful sound delivered directly to your installation and performance speaker systems. The SXD5000 is specially engineered for minimal distortion. Utilising an extended frequency range of 20Hz – 20kHz you’ll get accurate audio reproduction with a wide dynamic range. That means professional-quality sound without the effort. Ultimate control A perfect combination of power and precision. Take control of your sound with the SXD5000’s digital DSP interface. Designed to push the boundaries of value performance and reliability the advanced DSP offers a wide range of editable parameters for the best sound possible. Discover high and low pass filters a 3-band EQ output limiter and delay time for speaker alignment. Set up in minutes thanks to four customisable presets created to provide optimal settings for various speaker configurations. It’s as easy as plug in and play. The highest standard of reliability Built for the most demanding environments. Engineer your sound with confidence thanks to the SXD5000’s multi-stage protection. Your power amp is fully protected against power-up over-heating over-current short circuit low output impedance and DC voltage. You’ll get maximum performance night after night. With an all-steel chassis you’ll never have to worry about damages getting in the way of your show. Features Professional-quality power supply for your passive speaker systems Best-in-class performance with advanced DSP control including Crossover Filter EQ Limiter Delay and more Suitable for most performance and installation speaker configurations Huge power with 750W per side at four ohms Crystal clear audio guaranteed with minimal distortion across a 20Hz – 20kHz frequency range Fully customisable presets for a range of applications including DJ live sound and commercial installations Easy-to-navigate front panel with backlit LCD screen Monitor your levels with precision thanks to a multi-segment LED meter on each channel Connect to any setup with XLR and 1/4” inputs binding post and Speakon ouputs Fits neatly into any 19” rack with a dual rack space design Specifications Rated Output Power Stereo (both channel driven @ 8-ohms): 500W Rated Output Power Stereo (both channel driven @ 4-ohms): 750W Signal to Noise Ratio (20Hz-20k): 100dB Input sensitivity @ 8-ohms Voltage Gain: 5dBu Voltage Gain @ 8-ohm: 32dB Output Circuitry: 2-Tier Class H Current Consumption (115VAC/230VAC) @1/8 rated power 4ohms: 3.8A / 5.36A Current Consumption (115VAC/230VAC) @1/3 rated power 4ohms: 10A / 13.6A Current Consumption (115VAC/230VAC) @ rated power 4ohms max: 13.6A / 23.8A Distortion (typical @ 4-ohms): 0.02 Frequency Response @ 8-ohms 1Watt: 0/-1dB: 20Hz-20kHz Damping Factor (400Hz): 120 Input Impedance: 20K ohm (balanced) 10Vrms (22dBu) Cooling: Continuously variable speed fan cooling Connectors (each channel): 3-pin XLR and 1/4” TRS balanced (inputs) Binding post and Speakon® (outputs) Controls: Power switch CH A & CH B volume DSP Controls: UP DOWN BACK buttons & EDIT encoder/button Indicators: Signal -20dB -10dB Limit Thermal Protection: Short Circuit Open Circuit Thermal RF protection Load protected against DC faults DSP Display: 2×16 Character LCD DSP Modes: Manual mode 2 Full Range Mono 2-Way Sub/Sat 2 Subs DSP I/O Setting: Stereo Mono A+B Dual Mono A+B Link Parallel A Dual Parallel A Link DSP Digital Dynamics Function: Filter Crossover Gain Offset EQ Limiter DSP Digital Delay Function: Max 20ms per channel DSP Digital EQ Function per Channel: f0: 1/12 Octave at 20 20kHz Gain: +/- 12dB Q: 0.5 5.0 Presets: DJ Vocal Live Sound Install Rock Dance and Jazz DSP Setup: Lock Controls with Code Factory Reset Dimensions (L x W x H): 19” x 13” x 3.5” (482mm x 330mm x 88mm) Net Weight: 28.6lbs / 13kg

The post Samson SXD5000 Power Amplifier appeared first on Onthedex.

Peace for your mind power for your speakers. The Samson Servo 600 Power Amp delivers peerlessly stable operation along with all the power you need to fill your venue ensuring you get pristine sound quality every time. 1/4 jack RCA and binding post connectors cater to a variety of different inputs and outputs giving you a full range of connectivity no matter what the situation. Choose between 600W bridged mono for one powerful channel or spread your sound into two 300W stereo channels. Monitoring is easy thanks to precise 10-segment LEDs on each channel. Whether youre listening out front or plugging headphones directly into the unit youll have full control of your sound.

More info…

Superior power performance Everything you need to power your setup. The Servo 600 is a perfect fit for almost any application. Whether it’s multiple speaker chains conference room audio systems or large format speakers you’ve got a full-range of connectivity options to choose from. It’s as easy as plug in and play. The rear panel includes 1/4-inch balanced and RCA input connectors as well as 5-way binding post and 1/4-inch speaker outputs. This is performance like you’ve never experienced before with unparalleled ease of use. The reliability you deserve. The Servo 600 promises optimal performance and protection of all connected components. Thanks to 4-stage power protection circuitry youll never have to worry about nasty surprises stopping your show. And it all fits neatly into a dual 19″ rack space. Features Reference class audio performance from a servo-controlled power amplifier Fits seamlessly into 19” rack units with 2U of available space All the power you need with 300W per side at 4 ohms stereo Huge 600W of power at 8 ohms (bridged mono) Monitor your levels with precision thanks to 10-segment 3-colour LED meters Protected against overloading with 4-stage power protection Full range of connectivity with headphone jack 1/4” jack and RCA input connectors Setup with ease thanks to a 5-way binding post and 1/4” outputs Robust lightweight and durable design Specifications Stereo both channel driven: 8 Ohms: 225 Watts x 2 4 Ohms: 300 Watts x 2 Bridged mono: 8 Ohms 600 Watts Signal to Noise Ratio (20Hz-20k): 104dB Distortion (SMPTE-IM): 0.04 Input sensitivity @8 Ohms: 1.24V(4dBu) Voltage Gain: 34dB Output Circuitry Class: AB AC Power: @1/8 rated power 4 Ohms max.: 1.3A @1/3 rated power 4 Ohms max.: 3.3A @ rated power 4 Ohms max.: 10A Distortion (typical @4 Ohms): 20Hz-20kHz10dB below rated power: 0.03 IkHzrated power: 0.1 Frequency Response: @8 Ohms 1Watt 20Hz-20kHz 0/-0.5dB Damping Factor (400Hz): 350 Input Impedance: 15k Ohm Unbalanced 30k Ohm Balanced Input Clipping: 10 Vrms(22dBu) Cooling: Continuously variable speed fan forced air Connectors (each channel): Input: RCA unbalanced and 1/4”(6.3mm)TRS balanced Output: 5-way Binding post and 1/4” Phone Controls: AC power switch Channel 1 and 2 volume Indicators: Power on (blue) Protection (amber) Signal (green) for each Ch. Peak(red) for each Ch. Level: -24dB -20 dB -16 dB -12 dB -8 dB -4 dB -2 dB O +2 dB and +4 dB (PEAK). Protection: Short circuit ThermalCurrent limitDC offsetCurrent inrush RF protection Turn on/Turn off muting Power Requirements: 115/230240VAC50/60Hz Dimensions (W x H x D): 19” x 3.5” x 11.7” (483mm x 89mm x 297mm) Net Weight: 24 lbs (10.91 kg)

The post Samson Servo 600 Power Amp appeared first on Onthedex.