Connect with confidence. The Samson S-Max MCD2 Pro Stereo Computer/DJ Direct Box ensures the best signal from your unbalanced equipment. Whether youre on stage or in the studio youll get transparent audio with ultra-low distortion thanks to dual custom STLX transformers. Live sound has never been this easy. Whatever youre connecting to your mixer the S-Max MCD2 Pro Stereo has you covered. Connect via dual 1/4″ Jack RCA stereo 1/8″ inputs and balanced XLR outputs. To help deliver the cleanest signal possible the MCD2 Pro is fully equipped with a 2-position attenuation and ground lift switch. That means flawless audio in every scenario. Housed in a 14-guage steel chassis the S-Max MCD2 is fully prepared for the rigours of the road. Bumps knocks and scrapes will never get in the way of you putting on a great show. And thanks to its compact enclosure youll be able to fit your passive DI into any setup.

More info…

Crystal clear audio without compromise When you’ve got talent you need to get it heard. And with the S-Max MCD2 you’ll always get the best sound possible. Samson ensure the highest-quality audio with their custom STLX transformers. Designed to deliver maximum signal integrity the MU-Metal shielded transformers produce a wide flat frequency response with ultra-low distortion. You’ll get less hum and RF interference during your whole performance. Run cables for longer. The S-Max MCD2 makes it less likely to encounter unbalanced line connections ensuring that your signal will never drop in audio quality. Whether you’re connecting laptops CD/MP3 players or DJ mixers you can remain confident that you’ll always be sounding your best. Features Premium sound circuitry perfect for live studio DJ and recording applications High quality solutions for laptops CD/MP3 players and DJ mixers Versatile operation with a stereo/mono sum switch Exceptional signal integrity from dual STLX Mu-Metal shielded transformers Easily reduce amplitude without distortion thanks to a 2-position attenuation switch Minimises hums and buzzes with a ground lift switch Connect to a wide range of equipment via dual 1/4” RCA stereo 1/8” Inputs and Balanced XLR outputs No Phantom and Battery power required Clear sound across an 18Hz – 40kHz frequency response Protected against knocks and scrapes with an all-metal impact resistant design Specifications Type: Stereo Passive Direct Box Frequency Response: 18Hz – 40kHz ±0.1dB Maximum Input: +20dBu 0.35 THD Dynamic Range: Noise Floor: -117dB Total Harmonic Distortion: > 0.03 from 20Hz – 40kHz Input Impedance: Stereo: 400k? Mono: Output Impedance: 250? Transformers: Two STLX Faraday Shielded Transformers Transformer Ratio: 15:1 Input PAD Switch: 0dB / -12dB Ground Lift Switch: Disconnects XLR Pin-1 (Output) Stereo/Mono Switch: Sums Stereo Input to Both Outputs Connectors: 1/4 Phone Jack RCA Stereo 1/8 Unbalanced XLR Balanced (Output) Construction: 14 Gauge Steel Chassis Dimensions: 6.1 x 3.93 x 1.77 / 155mm x 100mm x 45mm Weight: 2.11lbs / 957g

The post Samson S-Max MCD2 Pro Stereo Computer/DJ Direct Box appeared first on Onthedex.

Great sound can be hard to achieve. Having the Samson MD1 Passive DI Box just made it a lot easier. Whether youre on stage or in the studio the MD1 promises crystal clear signal for your instruments microphones and more. That means clean connection no matter what the setting. Pristine audio for professional musicians. The MD1 ensures maximum clarity with a specially designed transformer. Designed for high-quality signal connection youll get an extended flat frequency response with ultra-low distortion. And thanks to its robust construction the MD1 is perfect for touring. The all-metal chassis protects your DI from knocks scrapes and scratches whilst youre out on the road. No nasty surprises. And no stopped shows.

More info…

As clear as day One of the most unique features of this DI box is the custom STL transformer designed and incorporated by Samson to deliver the highest-quality signal for the best possible audio. The MD1s balanced output gives you a clean signal which is less likely to encounter noise than an unbalanced line connection. That means you can run cables for longer without any drop in audio quality. Versatile streamlined design Simple in design. Yet highly versatile. The MD1 comes fully equipped with a range of premium components resulting in superb audio quality and performance. A Thru Jack connection lets you take the signal from the input and route directly to an amplifier or monitor without affecting the original quality. This minimises the need for external equipment such as instrument microphones. Features Pristine signal integrity perfect for live sound and studio recording applications Flat frequency response with low distortion thanks to Samson’s STL transformer Accurate audio reproduction thanks to an 18Hz – 40kHz frequency response Remove unwanted electrical noise with the ground lift switch Connect a range of equipment via 1/4” input Thru and balanced XLR output No phantom or battery power required Impact resistant design with an all metal enclosure Specifications Type: Mono Passive Direct Box Frequency Response: 18Hz to 40kHz ±0.1dB Maximum Input: +20dBu 0.35 THD Dynamic Range: >100dB @ Balanced Output Noise Floor: -117dB Total Harmonic Distortion (THD): Input Impedance: 400K Ohms Output Impedance: 250 Ohms ±20 Transformer: Samson STL Transformer Ratio: 15:1 Ground Lift: Disconnects XLR Pin-1 (Output) Connectors: 1/4” Phone Jack unbalanced (In & Thru) XLR balanced (Output) Dimensions: 127mm x 86mm x 49.6mm (5” x “ 3.38” x 1.95”) Weight: 680g (1.49 lb) For more information on the MD1 please refer to the PDF above.

The post Samson MD1 Passive DI Box appeared first on Onthedex.

Perform with confidence. The Samson MD1 Pro Mono Passive DI Box ensures the best sound for your instrument line and speaker level signals. Whether youre on stage or in the studio youll get transparent audio with ultra-low distortion thanks to a custom STLX transformer. Live sound has never been this easy. As simple as plug in and play. Whatever youre connecting to your mixer the MD1 Pro has you covered. Connect via 1/4″ Jack input Thru and XLR output. To help deliver the cleanest signal possible the MD1 Pro is fully equipped with a 3-position attenuation and ground lift switch. That means flawless audio in every scenario. Ready for anything. Housed in a 14-guage steel chassis the MD1 Pro is fully prepared for the rigours of the road. Bumps knocks and scrapes will never get in the way of you putting on a great show. Thanks to its compact enclosure youll be able to fit your passive DI into any setup.

More info…

Crystal clear audio without compromise When you’ve got talent you need to get it heard. With the MD1 Pro you’ll always get the best sound possible. Samson ensure the highest-quality audio with their custom STLX transformer. Designed to deliver maximum signal integrity the MU-Metal shielded transformer produces a wide flat frequency response with ultra-low distortion. You’ll get less hum and RF interference during your whole performance. Run cables for longer. The MD1 Pro makes it less likely to encounter unbalanced line connections ensuring that your signal will never drop in audio quality. Whether you’re connecting instruments vocals or speaker level signals you can remain confident that you’ll always be sounding your best. Features Premium sound circuitry perfect for live and studio applications High quality solutions for line instrument and speaker level signals Exceptional signal integrity from a STLX Mu-Metal shielded transformer Easily reduce amplitude without distortion thanks to a 3-position attenuation switch Minimises hums and buzzes with a ground lift switch Connect to a wide range of equipment via 1/4” Input Thru and Balanced XLR output No Phantom or battery power required Clear sound across an 18Hz – 40kHz frequency response Protected against knocks and scrapes with an all-metal impact resistant design Specifications Type: Mono Passive Direct Box Frequency Response: 18Hz to 40kHz ±0.1dB Maximum Input: +20dBu 0.35 THD Dynamic Range: (more than) 100dB @ Balanced Output Noise Floor: -117dB THD: (less than) 0.03 from 20Hz to 40kHz Input Impedance: 400kΩ Output Impedance: 250Ω ±20 Transformer: Faraday Shielded Transformer Transformer Ratio: 15:1 Input PAD Switch: 0dB -15dB -30dB Ground Lift: Disconnects XLR pin-1 (Output) Connectors: 1/4” Phone Jack unbalanced (In & Thru) XLR balanced (Output) Construction: 14-gauge steel chassis Dimensions: 127mm x 86mm x 49.6mm Weight: 667g

The post Samson S-Max MD1 Pro Mono Passive Direct Box appeared first on Onthedex.

Perform with confidence. The Samson S-Max MD2 Passive Stereo DI Box ensures the best sound for your instrument line and speaker level signals. Whether youre on stage or in the studio youll get transparent audio with ultra-low distortion thanks to dual custom STLX transformers. Live sound has never been this easy. As simple as plug in and play. Whatever youre connecting to your mixer the S-Max MD2 has you covered. Connect via dual 1/4″ Jack inputs Thrus and XLR outputs. To help deliver the cleanest signal possible the MD2 is fully equipped with two 3-position attenuation and ground lift switches. That means flawless audio in every scenario. Ready for anything. Housed in a 14-guage steel chassis the S-Max MD2 is fully prepared for the rigours of the road. Bumps knocks and scrapes will never get in the way of you putting on a great show. Thanks to its compact enclosure youll be able to fit your passive DI into any setup.

More info…

Crystal clear audio without compromise When you’ve got talent you need to get it heard. With the S-Max MD2 you’ll always get the best sound possible. Samson ensure the highest-quality audio with their custom STLX transformers. Designed to deliver maximum signal integrity the MU-Metal shielded transformers produce a wide flat frequency response with ultra-low distortion. You’ll get less hum and RF interference during your whole performance. Run cables for longer. The S-Max MD2 makes it less likely to encounter unbalanced line connections ensuring that your signal will never drop in audio quality. Whether you’re connecting instruments vocals or speaker level signals you can remain confident that you’ll always be sounding your best. Features Premium sound circuitry perfect for live and studio applications High quality solutions for line instrument and speaker level signals Versatile operation with a stereo/mono sum switch Exceptional signal integrity from dual STLX Mu-Metal shielded transformers Easily reduce amplitude without distortion thanks to dual 3-position attenuation switches Minimises hums and buzzes with dual ground lift switches Connect to a wide range of equipment via dual 1/4” Inputs Thrus and Balanced XLR outputs No Phantom or battery power required Clear sound across a 18Hz – 40kHz frequency response Protected against knocks and scrapes with an all-metal impact resistant design Specifications Type: Stereo Passive Direct Box Frequency Response: 18Hz to 40kHz ±0.1dB Maximum Input: +20dBu 0.35 THD Dynamic Range: >100dB @ Balanced Output Noise Floor: -117dB Total harmonic distortion: (less than) 0.03% from 20Hz to 40kHz Input impedance: 400kΩ (Stereo Switch Position) >10k (Mono Switch Position) Output Impedance: 250Ω ±20 Transformer: Faraday Shielded Transformer Transformer Ratio: 15:1 Input PAD Switch: 0dB -15dB -30dB Ground Lift Switch: Disconnects XLR pin-1 (Output) Stereo/Mono Switch: Sums stereo inputs to both outputs Connectors: 1/4” Phone Jack unbalanced (In & Thru) XLR balanced (Output) Construction: 14 gauge steel chassis Dimensions: 6.1” x 3.93” x 1.92” 155mm x 100mm x 49mm Weight: 946g (2.08lb)

The post Samson S-Max MD2 Passive Stereo DI Box appeared first on Onthedex.

Small, compact, and powerful, the Radial J+4 Balanced -10 dB to +4 dB Signal Driver is a versatile device designed to support low output level devices such as instruments, computers, and CD players. Acting as a stereo pre-amp, it boosts the signal to +4 dB, optimizing it for professional applications like broadcasting, studio recording, and live performances.

Featuring an isolated transformer design, the J+4 eliminates ground loop noise, providing authentic and crystal-clear sound reproduction. User-friendly controls include a stereo level control, high-pass filter, and ground lift. The J+4 offers multiple connection options with 2 x 1/4 jack inputs, RCA and 3.5mm inputs, and 2 x XLR outputs.

For more information, click on the link: More info…

Key features of the Radial J+4 Balanced -10 dB to +4 dB Signal Driver include:
– Stereo preamp that boosts signals to +4 dB balanced line level
– Increase gain for low output instruments and music players
– Isolated transformer design
– Plug & play use
– Ideal for broadcasting, recording studios, and live touring
– Minimal hum & buzz
– High-pass low cut filter
– Ground lift
– Designed to withstand testing touring environments with 14-gauge steel I-beam inner frame and book-end design
– No-slip pad

Specifications:
– Audio Circuit Type: Active -10 dB +4 dB Line Converter Transformer Isolated
– Number Of Channels: Stereo
– Frequency Response: 20Hz – 20kHz (±2 dB)
– Dynamic Range: 102 dB
– Maximum Input: +17 dBu @ 1kHz 1 Percent THD+N
– Total Harmonic Distortion: 0.004 Percent @ 1kHz +10 dBu Output
– Phase Deviation: 0.5° @ 100Hz; 4° @ 20Hz
– Input Impedance: 10kΩ Unbalanced
– Output Impedance: 1.6kΩ Balanced
– J+4 Transformer: Radial Custom Transformer
– High Pass Filter: -3 dB @ 100Hz (12 dB Oct)
– Ground Lift: Disconnects XLR Pin-1 At Isolated Output
– XLR Configuration: AES Standard (Pin-2 Hot)
– Connectors: 1/4 RCA 3.5 mm Inputs; XLR-Female Outputs
– Construction: 14 Gauge Steel Chassis and Outer Shell
– Finish: Durable Powder Coat
– Power: +15VDC/400mA Adaptor (Included)
– Conditions: For Use In Dry Locations Only Between 5°C and 40°C
– Weight: 700 g
– Dimensions Height: 127 mm Width: 84 mm Depth: 48 mm
– Product Code: R800-8015-00

The post Radial J+4 Balanced -10dB to +4dB Signal Driver appeared first on Onthedex.

Sleek but powerful. Go pro with the Radial Headload Prodigy Combination Load Box and DI. Whether you’re on-tour or in the studio, this is a must-have piece of equipment for any guitarist who desires to achieve tones that are envied.

Feel empowered by the versatility of the Prodigy. The wide range of functions it provides makes it suitable for a whole host of applications. Thanks to the inclusion of a JDX reactor, you’ll be able to use it as a direct box. The combination of a reactive load and proprietary filter bank perfectly emulates the tone of a 4 x 12 half stack with a trusty dynamic microphone in front of it.

When performing or recording in small spaces, you can use the load box aspect to attenuate the output signal from 20 down to one. This allows you to achieve larger than life tones without having to compromise on volume. Should you desire, the box can also be used without the need of a cabinet for silent recording possibilities. It’ll feel like a whole world of creativity is right at your fingertips with this in your arsenal.

More info…

Maximum signal integrity. The inclusion of an isolated transformer eradicates common issues such as hum and buzz which are triggered by ground loops. This allows you to feel confident knowing your guitar signal will be optimized at all times. If you’re pairing your device with an external source such as a microphone, then the polarity switch will come in handy to deal with pesky phase issues.

EQ and connectivity. The Prodigy allows you to make your tone sound great in any set of in-ear monitors. By tweaking the ultra-musical fixed-frequency two-band equalizer on the front of the sleek black fascia, you’ll be able to determine the exact amount of low and high-frequency content. This is perfect for applying that personalized finishing touch without having to compromise on the tone of your amplifier. The wide range of connectivity on offer allows you to feed additional amplifiers, effects racks, and interfaces either post or pre EQ and JDX.

Features. Compact and Robust Load/DI Box. Use as a DI via the JDX Reactor. Load box with 1 to 20 Attenuation. Allows direct connection to recording interface for silent amp recording. Built-in 4 x 12 Cabinet Emulation (Shure SM57 Microphone).

Specifications. Inputs: 1 x 1/4″ Jack (From Amp Speaker Out). Outputs: 1 x 1/4″ Jack (Thru), 1 x 1/4″ Jack (Attenuated), 1 x XLR (Main), 1 x 1/4″ Jack (Post EQ), 1 x 1/4″ Jack (Pre-JDX), 1 x 1/4″ Headphone. Impedance: 8 Ohms Input Load (Max): 100 Watts RMS. Speaker Emulation: 4 x 12 (Shure SM57 Microphone). EQ: High Low. Speaker Attenuator: 1 – 20. Housing: 14 Gauge Steel. Power Requirements: 15V DC (Sold Separately). Product Code: R800-7068-00.

The post Radial Headload Prodigy Combination Load Box and DI appeared first on Onthedex.

Inspection notes:

This Radial Headload Prodigy is in full working order and in excellent condition with original box. Included with this Radial Headload Prodigy are User Manuals and a Power Supply. This product is secondhand. It has been inspected by our team of product experts to ensure it meets our high-quality standards.

More info…

Maximum signal integrity:

The inclusion of an isolated transformer eradicates common issues such as hum and buzz which are triggered by ground loops. This allows you to feel confident knowing your guitar signal will be optimized at all times. If you’re pairing your device with an external source such as a microphone, then the polarity switch will come in handy to deal with pesky phase issues.

EQ and connectivity:

The Prodigy allows you to make your tone sound great in any set of in-ear monitors. By tweaking the ultra-musical fixed-frequency two-band equalizer on the front of the sleek black fascia, you’ll be able to determine the exact amount of low and high-frequency content. This is perfect for applying that personalized finishing touch without having to compromise on the tone of your amplifier.

The wide range of connectivity on offer allows you to feed additional amplifiers, effects racks, and interfaces either post or pre-EQ and JDX.

Features:

– Compact and Robust Load/DI Box
– Use as a DI via the JDX Reactor
– Load box with 1 to 20 Attenuation
– Allows direct connection to recording interface for silent amp recording
– Built-in 4 x 12 Cabinet Emulation (Shure SM57 Microphone)

Specifications:
– Inputs: 1 x 1/4″ Jack (From Amp Speaker Out)
– Outputs: 1 x 1/4″ Jack (Thru), 1 x 1/4″ Jack (Attenuated), 1 x XLR (Main), 1 x 1/4″ Jack (Post EQ), 1 x 1/4″ Jack (Pre-JDX), 1 x 1/4″ Headphone
– Impedance: 8 Ohms
– Input Load (Max): 100 Watts RMS
– Speaker Emulation: 4 x 12 (Shure SM57 Microphone)
– EQ: High, Low
– Speaker Attenuator: 1 – 20
– Housing: 14 Gauge Steel
– Power Requirements: 15V DC (Sold Separately)
– Product Code: R800-7068-00

The post Radial Headload Prodigy Combination Load Box and DI – Secondhand appeared first on Onthedex.

Clarity for your instruments.
The Radial PZ-DI Instrument DI Box lets you achieve studio-quality sound for your acoustic guitars, violins, and anything in between. Just plug in, play, and experience pristine connection from an adjustable load switch that tailors your DI to any type of pickup system.
No hassle. Just great sound.
The PZ-DI ensures optimal signal integrity with a range of noise-canceling functions. Tame your frequency response with high and low cut filters. Remove unwanted buzzing with the ground lift switch. And stop feedback in its tracks with the phase alignment control. All the power there right at your fingertips.
This is live sound made easy.
Whether you’re connecting directly to your PA or feeding an amp via the throughput, the PZ-DI has you covered. Never worry about harshness or squawks coming from your signal. The hi-Z input provides smooth audio so you can perform your best every single night.

More info…

Features
– Perfect for orchestral instruments in live performance settings
– Suited to piezo and magnetic pickups with an adjustable load
– Tame unruly frequencies with variable low-cut filter
– Contain excessive high frequencies with the high-cut switch
– No batteries required thanks to 48V phantom power
– Instantly reduce input sensitivity for active basses and keyboards with the -15dB pad switch
– Easily feed an onstage amplifier via 1/4″ hi-Z throughput
– Remove unwanted noise and feedback with phase invert and ground lift switches
– Monitor your DI’s performance via 48V phantom power LED
– Pristine signal connection from a balanced 600-ohm XLR output
– Bookend design protects vital connections and switches from damages
– Robust and lightweight design perfect for touring artists

Specifications
– Audio Circuit Type: Proprietary Analog Circuit with Low-Noise FET OP-Amp
– Frequency Response: 20Hz – 20KHz
– Dynamic Range: 105dB
– Equivalent Input Noise: -98dB
– Maximum Gain: +4.6dB
– Total Harmonic Distortion: 0.02
– Input Impedance: 10M / 1M / 220k-Ohms
– Input Impedance With PAD On: 50k-Ohms
– Output Impedance: 200 Ohms – Nominal
– Input Pad: -15dB
– XLR Configuration: AES standard (Pin-2 Hot)
– Power: 48V Phantom Power – Proprietary Digital Switching
– Construction: 14 Gauge Steel Chassis & Outer Shell
– Finish: Durable Powder Coat
– Size: (W x H x D) 84mm x 127mm x 48mm / 3.3 x 5.0 x 2
– Weight: 0.544kg (1.2lbs)
– FCC Approval: Complies with Section 15 of the FCC Rules
– Conditions: For Use in Dry Locations Only Between 5°C & 40°C

The post Radial PZ-DI Instrument DI Box appeared first on Onthedex.

The Radial JD6 Six-Channel Rackmount DI Unit is a versatile and powerful tool for musicians. It can be used with drum machines, bass and guitars, and synths, making it suitable for both live performances and studio recordings. The high-performance components ensure exceptional sound reproduction without distortion or coloration.

With six inputs and a wide range of connectivity options, the JD6 can handle any task. The front and rear panels offer various connection points for convenience. As a completely passive unit, it does not require external power to operate. The inclusion of galvanic isolation at the input and output stages eliminates the risk of hum or buzz interfering with your performances and recordings.

This DI unit is highly regarded by some of the world’s leading engineers for good reason. It is a valuable addition to any rack setup.

Features of the JD6 include enhanced features on channels 1 and 2 for flexibility, RCA jacks on channels 1 and 2 for easy connection to CD players and consumer products, a -15dB pad to reduce input level for hot signals, and a low-pass filter to remove noisy hiss. The Merge feature allows for a passive mixer that combines input and thru jacks, saving mixer channels.

The unit is equipped with isolated XLRs made from rugged glass-filled nylon and ID labels that work well with wax pencils for easy setup and troubleshooting. The switching jacks on channels 1 and 2 switch from back to front when front jacks are used. The floating channel design provides 100% isolation between channels.

Constructed with welded 14-gauge steel, the JD6 is durable for both on-the-road use and regular use. It features high-quality Jensen transformers with nickel cores for optimal signal transfer and MuMETAL shielding for protection against EMI. The isolated 1/4 jacks maintain the floating ground design for reduced noise. Internal ground switches on each channel allow the option to float or connect the ground to the chassis.

The JD6 is built with a military-grade PCB with steel stand-offs for years of trouble-free performance. It meets the specifications for use in dry locations only between 5°C and 40°C. The dimensions are 19 x 6.25 x 1.75 inches, and it weighs 3.6kg / 8lbs.

Overall, the Radial JD6 Six-Channel Rackmount DI Unit offers exceptional performance and durability, making it a valuable tool for musicians in both live and studio settings.

The post Radial JD6 Six-Channel Rackmount DI Unit appeared first on Onthedex.

The Radial J48 Phantom Powered Active DI Box offers natural tone and pristine signal integrity for every instrument, whether you’re on stage or in the studio. With zero distortion and outstanding headroom, it guarantees a great sound experience.

Equipped with various tools, the J48 allows you to eliminate unwanted noise with the ground lift switch and merge your stereo instruments to mono with the merge button. It also has a 15dB pad to reduce input sensitivity on the fly. These features are conveniently located at your fingertips.

The J48 is perfect for any setup, as its robust and compact construction allows it to fit even in the tightest of stage or studio spaces. Its metal chassis provides full protection against knocks and drops, ensuring uninterrupted performance.

To get the best from your instruments and increase headroom and dynamic range, the J48 is the perfect companion for guitars, basses, and high-output line level instruments. Unlike typical active DI boxes, it won’t overload even when played at maximum volume. Thanks to its unique switching power supply, the internal rail voltage can handle up to 9 volts, resulting in improved signal handling and virtually noise-free operation.

The J48 features exceptional signal integrity, a built-in merge switch for summing stereo instruments to mono, excellent signal handling and low noise from discrete and IC circuitry, a polarity reverse switch to quickly correct phase on old gear, an 80Hz high pass filter to clean up the bottom end, and a ground lift switch to remove unwanted humming and buzzes. It is powered by 48V phantom power, eliminating the need for batteries.

With its 15dB pad, you can easily reduce input sensitivity for high-output instruments, and the 1/4″ jack input and thru allow you to connect a wide range of equipment. Its balanced 600-ohm mic level output ensures a flawless connection.

The J48 is compact, robust, and lightweight, with a welded 14-gauge steel construction for durability. It has a baked enamel coat finish and measures 3.5″ (W) x 2″ (H) x 5.5″ (D) with a weight of 1kg.

For more information, click the link: More info…

The post Radial J48 Phantom Powered Active DI Box appeared first on Onthedex.