Audio Technica ATW-1101 Beltpack Digital Wireless System

zZounds

Audio Technica ATW-1101 Beltpack Digital Wireless System
Enhance your live performances with the Audio Technica ATW-1101 Beltpack Digital Wireless System. This system is specifically designed for performing musicians and presenters, providing advanced 24-bit operation, user-friendly setup, and dependable performance.

The ATW-1101 Wireless System includes a digital ATW-R110 receiver, which features volume control, AF Peak and Pair indicator lights, and a mono ATW-T1001 transmitter with a 4-pin locking input connector. You can find more information about this system by clicking on the link provided.

Some of the key features of the ATW-1101 Wireless System include the ATW-R1100 receiver and the ATW-T1001 UniPak transmitter. It operates in the 2.4GHz range, ensuring freedom from TV interference. Additionally, it offers three levels of diversity assurance – frequency, time, and space – for reliable performance.

The system also boasts automatic frequency selection, making it incredibly easy to use. It is equipped with 1/4 (6.3mm) and XLR connectors and provides options for channel selection, timing, and instant setup. The digital receiver ensures reliable performance, with operating frequencies ranging from 20Hz to 20kHz (depending on the microphone).

The ATW-1101 Wireless System has an operating range of 30m / 100ft with no interfering signals and a dynamic range of over 109dB A-Weighted. It also has a very low total harmonic distortion and a highly efficient audio sampling rate of 24-bit/48kHz. The latency is just 3.8ms, ensuring minimal delay.

The receiver uses a diversity system that combines frequency, time, and space to deliver optimal signal reception. It has balanced and unbalanced output connectors for flexibility and convenience. The power supply is compatible with a wide range of voltages (100VAC – 240VAC) and comes with a switched-mode external power supply.

The dimensions of the receiver are 190mm x 46.2mm x 128.5mm (W x H x D), and it weighs 290g. The belt pack transmitter has an RF power output of 10mW and is compliant with federal and national regulations regarding spurious elements. It is equipped with a four-pin locking connector for secure connection and uses two 1.5V AA batteries. The battery life is approximately 7 hours, depending on the battery type and use pattern. The dimensions of the belt pack transmitter are 70.2mm x 107mm x 24.9mm (W x H x D), and it weighs 100g.

If you’re interested in this product, the product code for the ATW-1101 Beltpack Digital Wireless System is ATW-1101.


CHECK PRICES AT ZZOUNDS