The Audio Technica ATM350UcW Instrument Mic kit is perfect for any instrument. It is a top choice for both engineers and performers. The kit includes the ATM350UcW cardioid microphone, UniMount clip-on mount, 5″ gooseneck, and a hook. Whether you’re on the road or in the studio, this microphone is versatile and reliable. Its cardioid polar pattern ensures a focused sound with excellent off-axis rejection.
The ATM350UcW also features a switchable high-pass filter, which allows you to reduce low-end rumble and unnecessary frequencies. This saves you time during the mixing stage. If you’re looking for high-quality sound capture, the ATM350UcW by Audio-Technica is the ideal choice.
For more information, click here: More info…
Features of the microphone include its low-profile design, providing unobtrusive mounting with minimal visibility. It has a crisp, clear, and well-balanced microphone response, even at high sound pressure levels (SPLs). The cardioid polar pattern reduces pickup of sounds from the sides and rear, isolating your desired sound source effectively.
The UniMount universal clip-on mount securely attaches to a variety of instruments while providing excellent shock resistance for the microphone. The rugged UniMount 5″ gooseneck maintains accurate microphone positioning, even during aggressive play. The wireless version of the microphone (ATM350acW) in this kit comes with a 1.4m cable with a 4-pin locking connection suitable for all Audio Technica UniPack body-pack wireless transmitters.
Specifications of the microphone include a fixed-charge back plate permanently polarized condenser microphone element. It has a cardioid polar pattern and a frequency response of 40Hz to 20kHz. The microphone also has a low-frequency roll-off at 80Hz with a slope of 12dB/octave.
Other specifications include an open circuit sensitivity of -49dB (3.5mV) re 1V at 1Pa, an impedance of 200 Ohms, and a maximum input sound level of 159dB SPL at 1kHz with 1% THD. The dynamic range is 130dB at 1kHz at maximum SPL, and the signal-to-noise ratio is 65dB at 1kHz at 1Pa. The microphone requires phantom power of 11-52V DC with a typical current consumption of 3.5mA. It has a flat/roll-off switch and weighs 14.5g (0.5oz).
The power module weighs 90g (3.2oz) and has dimensions of 92mm (3.62″) long and 18.9mm (0.74″) in diameter. The output connector is an integral 3-pin XLRM-type. The microphone is permanently attached to a 4.0m (13.1ft) long cable, which has a diameter of 3.2mm (0.13″) and is a 2-conductor shielded cable with HIROSE HR10-type connector.
Optional interchangeable elements are available for hypercardioid and omnidirectional polar patterns, but they are not included in this kit and must be purchased separately. The microphone comes with several accessories, including the ATM350acW wireless cardioid condenser microphone, AT8491U UniMount universal clip-on mount, AT8490 UniMount 5″ gooseneck, AT8468 Violin Mount (Hook-and-Loop Fastener), and a protective carry case.
The product code for the Audio Technica ATM350UcW Instrument Mic kit is ATM350UcW.
CHECK PRICES AT ZZOUNDS
