Audio Technica ATM350U Instrument Mic with Universal Mounting System – Nearly New

zZounds

Audio Technica ATM350U Instrument Mic with Universal Mounting System - Nearly New
The Audio Technica ATM350U Instrument Mic kit is perfect for a wide range of instruments. It includes the ATM350a cardioid microphone, AT8543 in-line power module, UniMount clip-on mount, and a 5″ gooseneck. Whether you’re in the studio or on the road, this kit delivers outstanding performance. The cardioid polar pattern ensures a focused sound with excellent off-axis rejection. Additionally, the ATM350U features a switchable high-pass filter to reduce low-end rumble and unwanted frequencies, saving time during the mixing stage. For high-quality capture, the ATM350U by Audio-Technica is the ideal choice.

For more information, click here: More info…

Key Features:
– Low-profile design for unobtrusive mounting
– Crisp, clear, and well-balanced microphone response, even at high sound pressure levels
– Cardioid polar pattern for excellent isolation of the desired sound source
– UniMount universal clip-on mount for secure attachment to instrument bell and shock resistance
– Rugged UniMount 5″ gooseneck maintains accurate microphone positioning during aggressive play
– In-line power module with switchable 80Hz high-pass filter to control low-frequency ambient noise
– Optional interchangeable elements available for hypercardioid and omnidirectional polar patterns (not included in this kit)

Specifications:
– Microphone Element: Fixed-charge back plate permanently polarized condenser
– Polar Pattern: Cardioid
– Frequency Response: 40Hz to 20kHz
– Low-Frequency Roll-Off: 80Hz, 12dB/Oct
– Open Circuit Sensitivity: -49dB (3.5mV) re 1V at 1Pa
– Impedance: 200 Ohms
– Maximum Input Sound Level: 159dB SPL, 1kHz at 1% THD
– Dynamic Range (Typical): 130dB, 1kHz at max. SPL
– Signal-To-Noise Ratio: 65dB, 1kHz at 1Pa
– Phantom Power Requirements: 11-52V DC, 3.5mA typical
– Switch: Flat/Roll-Off
– Microphone Weight: 14.5g / 0.5oz.
– Microphone Dimensions: 37.8mm / 1.49″ long, 12.2mm / 0.48″ max. body diameter
– Power Module Weight: 90g / 3.2oz.
– Power Module Dimensions: 92mm / 3.62″ long, 18.9mm / 0.74″ diameter
– Power Module Output Connector: Integral 3-pin XLRM-type
– Cable: 4.0m / 13.1ft long (permanently attached to microphone), 3.2mm / 0.13″ diameter, 2-conductor shielded cable with HIROSE HR10-type connector
– Optional Interchangeable Elements: UE-H Hypercardioid (Not Included), UE-O Omnidirectional (Not Included)
– Included Accessories: ATM350a Cardioid Condenser Microphone, AT8543 Power Module, AT8491U UniMount Universal Clip-On Mount, AT8490 UniMount 5″ Gooseneck, Protective Carry-Case
– Product Code: ATM350U


CHECK PRICES AT ZZOUNDS