Ideal for a wide array of instruments, the Audio Technica ATM350U Instrument Mic kit is the ultimate choice for any engineer and performer. The kit includes a premium quality ATM350a cardioid microphone, AT8543 in-line power module, UniMount clip-on mount, and 5″ gooseneck. The ATM350U is just as comfortable on-the-road as it is in the studio.
Thanks to its cardioid polar pattern, the ATM350U ensures a tight focused sound with excellent off-axis rejection. It also includes a switchable high-pass filter, allowing you to reduce low-end rumble and other unnecessary frequencies, saving you time during the mixing stage. If you’re serious about high-quality capture, look no further than the ATM350U by Audio-Technica.
Features of the ATM350U include a low-profile microphone design for unobtrusive mounting with minimal visibility, a crisp, clear, and well-balanced microphone response even at high SPLs, and a cardioid polar pattern for reduced pickup of sounds from the sides and rear, providing excellent isolation of your desired sound source.
The kit also comes with a UniMount universal clip-on mount that attaches securely to the instrument bell and provides excellent shock resistance. The rugged UniMount 5 gooseneck rigidly holds its shape, maintaining accurate microphone positioning even during aggressive play.
The in-line power module is equipped with a switchable 80Hz high-pass filter for controlling undesirable low-frequency ambient noise. Optional interchangeable elements are available for hypercardioid and omnidirectional polar patterns, although they must be purchased separately and are not included in this kit.
Specifications of the ATM350U include a fixed-charge back plate permanently polarized condenser microphone element, a frequency response of 40Hz to 20kHz, an 80Hz low-frequency roll-off, and an impedance of 200 Ohms.
The microphone has a maximum input sound level of 159dB SPL at 1kHz with 1% THD, a dynamic range of 130dB at max SPL, and a signal-to-noise ratio of 65dB at 1kHz with 1Pa. It requires phantom power of 11 – 52V DC, with a typical current of 3.5mA. The microphone itself weighs 14.5g (0.5oz) and has dimensions of 37.8mm (1.49″) long and 12.2mm (0.48″) maximum body diameter.
The power module weighs 90g (3.2oz) and has dimensions of 92mm (3.62″) long and 18.9mm (0.74″) diameter. It has an integral 3-pin XLRM-type output connector. The kit also includes a 4.0m (13.1ft) long cable that is permanently attached to the microphone, with a diameter of 3.2mm (0.13″) and a 2-conductor shielded cable with HIROSE HR10-type connector.
Optional interchangeable elements available for the ATM350U include the UE-H hypercardioid and UE-O omnidirectional polar patterns. The kit includes accessories such as the ATM350a cardioid condenser microphone, AT8543 power module, AT8491U UniMount universal clip-on mount, AT8490 UniMount 5 gooseneck, and a protective carry-case. The product code for the ATM350U is ATM350U.
CHECK PRICES AT ZZOUNDS
