Audio Technica ATM350D Instrument Mic with Drum Mounting System

zZounds

Audio Technica ATM350D Instrument Mic with Drum Mounting System
Ideal for drums, the Audio Technica ATM350D Instrument Mic kit is the ultimate choice for any engineer and performer. The kit includes a premium quality ATM350a cardioid microphone, AT8543 in-line power module, UniMount clip-on mount and 5″ gooseneck, as well as a hook and loop drum mount.

The ATM350D is versatile and suitable for both live performances and studio recording. With its cardioid polar pattern, it captures a tight, focused sound while rejecting off-axis noise. It also includes a switchable high-pass filter that reduces low-end rumble and unnecessary frequencies, saving time during the mixing stage.

If you’re looking for high-quality audio capture, the ATM350D by Audio-Technica is the perfect choice.

Features of the mic kit include a low-profile design for unobtrusive mounting, a crisp and well-balanced microphone response even at high sound pressure levels, and excellent isolation of the desired sound source due to the cardioid polar pattern. The UniMount drum mount features a spring-loaded mechanism for secure attachment to drum lugs and provides shock resistance for the microphone. The UniMount 5 gooseneck maintains accurate microphone positioning even during aggressive play.

The in-line power module comes with a switchable 80Hz high-pass filter to control low-frequency ambient noise. Optional interchangeable elements are available for hypercardioid and omnidirectional polar patterns (not included in this kit).

The ATM350D kit also includes a drum mount with a hook-and-loop fastener for additional mounting options.

Specifications of the microphone and power module are as follows:
– Microphone Element: Fixed-charge back plate permanently polarized condenser
– Polar Pattern: Cardioid
– Frequency Response: 40Hz to 20kHz
– Low Frequency Roll-Off: 80Hz, 12dB/Oct
– Open Circuit Sensitivity: -49dB (3.5mV) re 1V at 1Pa
– Impedance: 200 Ohms
– Maximum Input Sound Level: 159dB SPL 1kHz at 1 percent THD
– Dynamic Range (Typical): 130dB 1kHz at max. SPL
– Signal-To-Noise Ratio: 65dB 1kHz at 1Pa
– Phantom Power Requirements: 11-52V DC, 3.5mA typical
– Switch: Flat, Roll-Off

The microphone weighs 14.5g/0.5oz and has dimensions of 37.8mm/1.49″ long and 12.2mm/0.48″ maximum body diameter. The power module weighs 90g/3.2oz and has dimensions of 92mm/3.62″ long and 18.9mm/0.74″ diameter. The power module has an integral 3-pin XLRM-type output connector.

The kit includes a 4.0m/13.1ft long permanently attached cable with a 3.2mm/0.13″ diameter shielded cable with HIROSE HR10-type connector.

Optional interchangeable elements for hypercardioid and omnidirectional polar patterns are not included in this kit and must be purchased separately.

Included accessories in the kit are:
– ATM350a Cardioid Condenser Microphone
– AT8543 Power Module
– AT8491D UniMount Drum Mount
– AT8490 UniMount 5 Gooseneck
– AT8468 Drum Mount (Hook-and-Loop Fastener)
– Protective Carry-Case

The product code for the Audio Technica ATM350D Instrument Mic kit is ATM350D.


CHECK PRICES AT ZZOUNDS