Audio Technica AT4050 Multi-Pattern Condenser Mic with Shock Mount

zZounds

Audio Technica AT4050 Multi-Pattern Condenser Mic with Shock Mount
The Audio Technica AT4050 is a highly regarded large-diaphragm condenser microphone that is widely used by top producers and recording studios. It is praised for its ability to capture every subtle detail of the room and instrument being recorded. The microphone’s gold-vaporized diaphragm ensures consistent and outstanding performance, while the brass acoustic element provides stability.

One of the key features of the AT4050 is its three switchable polar patterns, allowing for versatile pickup range adjustment. To further enhance the microphone’s performance, it comes with a high-quality shock mount that helps attenuate low-frequency rumble, shock, and vibrations transmitted through the microphone stand.

For more information on the Audio Technica AT4050, you can visit the link provided.

The AT4050 is a classic studio condenser vocal microphone known for its clean, crisp, and accurate sound reproduction. It is suitable for both studio and live applications. The microphone’s dual-diaphragm capsule ensures precise polar pattern definition, while the switchable 80 Hz hi-pass filter and 10dB pad add versatility to the sound output.

Durability is also a strong point of the AT4050, with its rugged casing designed for reliable extended use. Each microphone is hand assembled and inspected to guarantee 100% quality control. The microphone comes with an AT8449a shock mount, which provides superior sonic isolation.

In terms of specifications, the AT4050 has an externally-polarized (DC Bias) condenser element with a frequency response of 20Hz – 18kHz. It has an 80Hz low-frequency roll-off at 12dB/octave and an open circuit sensitivity of -36dB (15.8 mV) re 1V at 1 Pa. The microphone has an impedance of 100 Ohms and a maximum input sound level of 149dB SPL at 1 kHz with 1% T.H.D, or 159dB SPL with a 10dB pad (nominal). The dynamic range is 132dB at 1kHz with 1 Pa, and the signal-to-noise ratio is 77dB at 1 kHz with 1 Pa. The AT4050 requires 48V phantom power, drawing 4.2mA typical. Its weight is 510g, and its dimensions are 188mm x 53.4mm (L x D). The product code for the AT4050 is AT4050.


CHECK PRICES AT ZZOUNDS