The ART USB Dual Pre PS 2-Channel Preamp is a fully-featured portable preamplifier with USB recording functionality. Designed to work in a wide variety of applications from field recording to at-home studio recording the ART USB Dual Pre delivers high-quality audio in a compact housing. The two ultra-low noise combination inputs allow you to connect either XLR or 1/4-inch jack to plug in your direct electronic devices such as electronic guitar synthesizers or drum machines as well as your favourite dynamic and condenser microphones thanks to the phantom power option. Each channel boasts up to +48dB of clean and consistent gain with independent gain levels to set the balance perfectly for your source. With clip LED indicators you will always ensure that you dont run into any unwanted distortion in your signal. The all-aluminium case and the ability to be powered by either a power supply internally via USB (cable included) or 9V battery makes USB Dual Pre makes the ideal solution for the on-the-go musician. With just your laptop and the USB Dual Pre you can do some serious remote recording all in immaculate quality.
Flexible connectivity to capture any source To ensure connectivity to almost any audio source the ART USB Dual Pre features two combination inputs that allow you to plug XLR or 1/4-inch unbalanced jack cables. Ideal for connecting vocal microphones both dynamic and condenser thanks to the onboard phantom power direct level instruments such as electric guitars or bass and even line-level outputs from drum machines or synthesizers. The high level of fixed impedance ensures that when using passive electronic instruments such as an electric guitar your signal will be amplified to the perfect level without introducing any background noise or interference. As well as inputs the ART USB Dual Pre also features some very handy outputs to help you integrate into your setup. Two 1/4-inch balanced output jacks allow you to connect to a set of powered monitors a mixing desk or to a PA system directly without the need for any extra equipment. Additionally a stereo 1/8-inch unbalanced jack output with an impedance of 50 Ohms allows you to connect your favourite pair of studio headphones to monitor your performance gain levels and tone silently. Ideal for tracking parts in the studio. The brains of your recording setup Acting in a similar sense to an audio interface the ART USB Dual Pre PS 2-Channel Preamp allows you to record your input audio to your computer via the USB output as well as monitoring back your recorded signals back through the ART USB and the two 1/4-inch monitor outputs. Using standard USB coding the ART USB Dual Pre is class-compliant allowing you to connect to any laptop or desktop device without the need for any drivers allowing you to simply plug in switch on and record. A USB cable is also provided eliminating the need for any additional purchases. Expertly designed the latency time between your audio input and the USB output is typically under two milliseconds meaning you will always be on time with your parts when recording and wont need to make any adjustments to your recorded signals in post-production. Recorded in high-quality digital information the USB output can be configured to either 44.1 or 48kHz sampling frequency at 16-bit to make sure the standards are met for most recording applications. Wide range of recording applications For the home-studio musician the ART USB Dual Pre offers an excellent solution for delivering high-quality audio in a compact and intuitive format. Both dynamic and condenser microphones can be used through the preamplifier thanks to the phantom power option and with an extremely low level of noise high headroom and up to +48dB of clean and consistent gain you will be able to capture the detail of any sound source you need to record. As the ART USB Dual Pre is operational via a battery USB power or an external adapter it makes it the ideal companion for the travelling musician. Whether youre backstage on-stage or at rehearsals you will be able to record your performance in stunning quality and listen back to this at any time to improve the experience for your audience. Compact and lightweight this is a must-have for any intermediate or beginner musicians. FeaturesUSB connection for desktop and laptop Ultra-low noise combination XLR and 1/4-inch TRS inputs Up to a maximum of +48dB of clean consistent gain Low-noise phantom power supply to connect your favourite condenser microphones Monitor your input latency free with mix and level controls Independent gain controls per channel to dial in the perfect amount of gain for your source Monitor your 1/8-inch headphone output Includes audacity recording software Compact and durable all-aluminium chassis Full-range frequency response with maximum accuracy to capture your audio to perfection Ultra-low harmonic distortion keeps your signal clean and pristine 16-Bit 44.1 or 48kHz USB signal processing delivers ultra-high fidelity of audio transfer Powered by either USB external power supply or 9v battery Class-compliant USB plug and play operation Includes USB cable to get you startedSpecificationsFrequency Response: 20 Hz – 20 kHz (+0 -1 dB) THD: Less than 0.01% at 1 kHz CMRR: More than 60 dB Channel Separation: Less than 75 dB Signal to Noise Ratio: Less than 90 dB (Ref 0 dBu) Equivalent Input Noise: -120 dBu typical (XLR balanced gain at maximum) Input Impedance: Less than 300k Ohms 1/4-inch input Less than 4k Ohms XLR input Output Impedance: 600 Ohms (balanced 1/4-inch) 50 Ohms (headphone 1/8-inch) Maximum Signal Level: +6 dBu in +10 dBu out (balanced) +4 dBu out (single ended) Maximum Gain: +48 dB (balanced in-out) Phantom Power: Switch selectable +48Volts DC filtered current limited Input Connections: XLR / 1/4-inch TRS “Combo” jack balanced or unbalanced Output Connection: 1/4-inch TRS balanced 1/8-inch TRS headphone mini jack A/D-D/A: 16 Bit 44.1 kHz or 48 kHz USB selectable from computer 0.4 ms A/D latency at 44.1 kHz Computer Interface: USB class compliant plug-andplay Mac and PC interface Chassis Type: All aluminum black anodized with integral rubber sides Power Requirements: USB bus powered or Optional 7.5 12V AC or DC at less than 50mA (external) or 9V Battery at 20mA Dimensions (HWD): 44.5mm x 117mm x 119mm Weight: 0.59 kg Product code: ART-USBDUALPREPS
CHECK PRICES AT ZZOUNDS
