The ART SPLITMix4 is a versatile passive hybrid mixer and splitter that you can use to route stereo and mono audio signals in multiple configurations. Primarily equipped for two main roles as a mixer or a splitter the SPLITMix4 has a single input for the splitter and output for the mixer in the form of TRS jacks that subsequently interact with four TRS connectors each. Four splitter outputs send audio signals to multiple monitoring systems from the splitter input and four mixer inputs combine send signals from equipment to a single source jack output like any other traditional mixer each channel has its own independent gain attenuator. Each channels gain control can achieve up to 90dB of attenuation. You can also combine the mixer and splitter for ultimate signal path mapping and intelligent switching technology automatically maps your audio signals through the SPLITMix4 depending on which inputs you use and whether you use stereo or mono cables. There are more than nine different ways to connect instruments monitors and other important audio equipment are available. For example you can connect up to four instruments four audio monitoring systems and a processing unit and route them however you want by following directions in the manual. The passive design negates the need for external power allowing your audio signals to pass through the SPLITMix4 with complete purity also keeping the module compact simple and easy to use. Designed for line level use the SPLITMix4 works well with most medium impedance equipment it might however need an external amplifier for low impedance studio equipment or high impedance instrument pickups. Build to last the outer chassis is made from robust materials and displays a classy black finish with bold purple and white text its compact size makes it extremely portable and easy to store. The ART SPLITMix4 is an essential item for anyone looking for a compact passive mixer and splitter for their studio or live setup.
Features Completely passive hybrid mixer and splitter module with four channels Each channel has its own independent gain control with 90dB of attenuation Mixer and splitter have total of five TRS connectors each Ultimate signal path mapping ability with nine ways to configure the device Intelligent switching technology automatically maps signal path Rugged outer build and compact size make it extremely portable Passive design negates the need for external power and keeps audio signals pure Both stereo and mono output are availableSpecifications Frequency Response: 20Hz – 20kHz +/-1dB THD: 90dB (typical) Phase Response: 90dB (typical) Channel Isolation: >90dB (typical) Power Requirements: None (fully passive) Dimensions(HxWxD): 47mm x 117mm x 104mm Weight: 0.38kg Product code: ART-SPLITMIX4
CHECK PRICES AT ZZOUNDS
