Great speeches deserve to be heard. Bring crisp, immaculate sound to your performances with an Electro-Voice RE3-BPHW Single Headworn Wireless Mic Set. When you’re giving a speech or leading an exercise class, every word is important. So choose a wireless system that will capture every word in superb detail.
Setting up couldn’t be easier with channel scan and synchronization functions. You’ll be up and running in no time. Once you’re set up, the headworn microphone delivers great sonic results with a supercardioid polar pattern, rejecting any off-axis sound and giving the audience nothing but your voice.
Superb isolation and noise rejection: The supercardioid polar response pattern offers superb gain before feedback, so you can get a great signal even in noisy environments. You also don’t need to worry about the noise of the microphone against your cheeks, as the capsule is shock-mounted to eliminate this problem. When you’re on the move, the cable detaches from the headset for safe storage without putting pressure on stress points.
Easy setup, simple connection: Component synchronization is just seconds away. All you need to do is use the included sync function on the transmitter and receiver, and you’ll be ready to perform in seconds. Cut down on setup times and get straight to your performance. You can even check what frequencies are available in your environment with the receiver’s channel scan function. Never be held back by a busy wireless environment again. This is ideal if you need to use more than one wireless set in the same frequency band without interference or at locations such as festivals where many people might be using a wireless set.
823 – 832MHz and 863 – 865MHz wireless bands: The 863 – 865MHz band is license-free across most of Europe, ideal for any small-scale application such as bands or public speakers who just need one channel without paying a license fee. For larger organizations or applications where a license may be required for insurance or other monitoring purposes, licenses for the 823 – 832 MHz band are available from local authorities in many countries. Please see the attached PDFs for further licensing information. In every case, this information acts only as a guide. Please contact your local licensing authority if you require a license or further information on licensing in your area.
Features:
– Frequency scanning lets you ensure there are free frequencies.
– Sync function lets you connect transmitter and receiver in seconds.
– Excellent speech intelligibility thanks to high-quality mic capsule.
– Robust construction throughout with metal bodies on each component.
– Two frequency bands in one system – great if you need a license or license-free.
What’s in the box?
– HW3 Supercardioid Headworn Microphone
– RE3-BPT Bodypack Transmitter
– RE3-RX Diversity Receiver
– Two receiver antennas
– Universal power supply
– Two AA batteries
– Receiver rack mounting hardware
– Owner’s manual
– Documentation packet
Specifications:
– RE3-RX RE3 receiver
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic 40 kHz
– Diversity: Antenna diversity
– Bandwidth: 36MHz
– Signal/Noise ratio: >100dB(A)
– Total harmonic distortion(Thd): <0.6% at 1kHz
– Receiving sensitivity: -81dBm for -12dB SINAD
– Frequency response: 63Hz – 16kHz±2dB (BPT) 51Hz – 16kHz±2dB (HHT)
– Antenna type: Detachable 1/2 wave with BNC connector
– Antenna booster power: DC12 – 15V/100mA
– Function display by: LCD
– Control functions: Power scan frequency group channel squelch TX sensitivity TX attenuation TX RF power TX auto off TX key lock TX display info TX sync configuration RX output volume RX output level RX antenna booster power RX key lock RX display contrast RX display brightness RX system reset.
– Sync data options: Frequency group channel sensitivity level attenuation status RF power auto off status key lock status transmitter display (freq or Gp/Ch)
– Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced)
– Squelch and noise muting: Noise muting and tone code locking
– Output ports: 1 x balanced XLRM jack 1 x unbalanced 1/4" TS (6.3mm) jack
– Power supply: DC12 – 15V/500mA
– Finish: Black polyurethane paint
– Dimensions: 47 mm x 210 mm x 175 mm
– Net weight: 1.23 kg
– Gross weight: 1.49 kg
RE3-BPT-8M Bodypack transmitter
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic
– RF power output: 10mW
– Display by: LCD + LED
– Function controls: Power mute group channel frequency sensitivity adjustment input level attenuation RF power auto off key lock.
– RF stability: <±10kHz at Fc
– Modulation frequency shift: Wideband FM ±48kHz deviation
– Harmonic radiation: <-50dBc
– Input jack: 4-pin mini jack
– Battery: 2 x AA alkaline battery or NiMH rechargeable battery
– Charging contacts: Yes
– Finish: Black polyurethane paint
– Dimensions (without antenna): 81.5mm x 64.5mm x 25mm
– Net weight: 0.174 kg
– Gross weight: 0.235 kg
RE3-ACC-HW3 headworn mic
– Element type: Self-biased condenser
– Frequency response: 30 Hz – 18 kHz
– Polar pattern: Supercardioid
– Sensitivity open circuit voltage 1 kHz: 0.5 mV/Pascal (-47 dBV/PA)
– Maximum SPL: 130 dB SPL
– Impedance: 1000 ohms
– Power requirements: 3-9 VDC
– Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
– Electrical contact pinouts: Pin 1 – Ground shield Pin 2 – Audio Pin 3 – Bias voltage Pin 4 – N/C
– Cable length: 1150 mm
– Boom length: 148 mm
– Net weight: 38.4 g
– Shipping weight: 168 g
– Microphone connector: 4-pin mini xlr
– Head finish: Non-reflecting Black
