A modern classic. Preserve the integrity of your signal with the Neumann V402 Microphone Preamp. This is the first preamp that Neumann have launched since the groundbreaking V 476b in the 80s which is still highly sought after. Whether theyre modern or vintage designs Neumann products have never been anything short of groundbreaking and the V 402 is a testament to this. The V402 features two transformerless preamps and high impedance instrument inputs. These are designed to reinforce the sonic image presented by the microphone and instrument. That means what you hear in the room is what youll hear in the speakers. The V 402 is designed to project your sound to be heard by the masses. Free from the risk of colouration noise and artefacts that can be introduced when using other preamps. The V 402 is as pure as it gets. With a sleek stylish white fascia all the controls are laid out in an intuitive manner for easy operation. The V 402 will be an incredible asset to your set up and is well worthy of the Neumann name.
Sonic integrity The connection points on the V402 are designed to provide you with the purest signal possible. The direct injection inputs will capture the full bodied sound of guitars basses and synths without any colouration or degradation of signal. The switchable 20dB pad allows you to assert control over sources with high SPL (sound pressure levels) to prevent the risk of distortion. By engaging the high-pass filter youll be able to instantly remove undesirable low frequency energy. This will save a great deal of time in the post-production stages and will take your mixes and recordings to the next level. Whats Included? The V402 microphone preamp includes; Three main cables (UK US EU) Quick Guide Safety Guide Rubber feet Features Two-channel state-of-the-art transformerless microphone preamp Two studio-quality instrument inputs with very high impedance Switchable low-cut removes rumble without signal degradation Exceptionally clean headphone amplifier Easy monitoring mix with volume control for each channel Handmade in Germany Specifications Frequency Range: 10Hz to >100kHz (-3dB @ 40dB Gain) High Pass Filter: 60Hz 12dB/Oct (Switchable On/Off) Dimensions: 89mm x 463mm x 242mm (H x W x D) Weight: 6.2kg Product Code: 008682 Microphone Inputs Connectors: 2 x XLR Input Impedance: Approx. 3k Ohms Minimum Gain: +20dB (PAD Off) Maximum Gain: +60dB (PAD Off) Attenuation PAD: -20dB Switchable Maximum Input Level: PAD Off: +8dBu PAD On: +28dBu Power Supply: 48V Max. 10mA (Switchable) Hi-Z Inputs Input Control: Switchable On/Off Connector: 1/4″ (6.3mm) Jack Mono Unbalanced Input Impedance: 3.3M Ohms Maximum Input Level: +21dBu Minimum Gain: 0dB (PAD Off) Maximum Gain: +40dB (PAD On) Outputs Connectors: 2 x 3-Pin XLR Output Impedance: Approx. 200 Ohms Maximum Output Voltage: +26dBu into 1k Ohms Load Impedance Ground Lift: Switchable On/Off Headphone Output Output Type: Switchable Mono/Stereo Connector: 1/4″ (6.3mm) Jack Stereo Volume Control: Left + Right Channel + Master Output Impedance: Approx. 2 Ohms Maximum Output Voltage: +20dBu into 150 Ohms Load Impedance
CHECK PRICES AT ZZOUNDS
