The Neumann MA 1 Monitor Alignment Kit with KH 80 DSP Monitors brings precision and detail to your control room. With an individually calibrated measurement microphone pair of prograde monitors and user-friendly software its like having an expert engineer right in the room. Exceptional sound reproduction for musicians. The 4-inch and 1-inch drivers are powered via highly capable 120w/70w amplifiers with a 57Hz bass extension and 108.8 dB sound pressure level. Network control allows the KH 80 to be controlled via Neumann Control giving users the ability to use the loudspeaker in diverse environments with any source equipment. The best possible sound for home studios and professional control rooms. The MA 1 Monitor Alignment software automatically calibrates your stereo monitors. Advanced calibration algorithms make it easy to get world-class results no matter where you mix master and monitor.
Neumann MA 1 Monitor Alignment Professional monitoring made easy No special drivers. No additional plug-ins. All alignment data is stored directly into your DSP-powered monitors. Adjust phase and amplitude with the software. You dont need special acoustic knowledge to get great results. This kit does the hard work for you. Neumann KH 80 DSP A Studio Monitor Exceptional sonic accuracy and consistency The KH 80 is the first Neumann DSP studio monitor and delivers the most accurate sound reproduction with added flexibility thanks to the DSP engine and efficient drivers. Combined with the Mathematically Modeled Dispersion Waveguide (MMD) and the rest of the premium-grade components the KH 80 delivers exceptional audio fidelity. The digital signal processing engine ensures that the sound is pristine and clear whilst the drivers deliver outstanding sound reproduction with quality bass mid-range and treble results. Mathematically modeled dispersion (MMD) Waveguide The MMD waveguide provides optimum control over directivity of the mid-range and treble drivers. The technology allows drivers to experience increased loading reduced edge diffraction and an overall smoother power response and wider listening area. The result gives the KH 80 reduced audio distortion and ultimately improves the quality of sound reproduction. Ideal for at home and in the studio Designed for use as a near-field monitor a front loudspeaker in small multi-channel systems or as a rear loudspeaker the Neumann KH 80 is incredibly suited to desktop applications and domestic environments. This makes it ideal for use within broadcast centres music OB cans post production studios or mixing and mastering. Representing the very latest in acoustic and electronic simulation the most accurate sound reproduction is made possible within the Neumann studio monitor. What’s in the box 1 x KH 80 DSP Active Monitor 1 x UK Mains Cable 1 x Safety Booklet 1 x Getting Started Quickly Guide 4 x Self-Adhesive Feet 1 x MA 1 Microphone 1 x Microphone clamp 1 x Quick guide 1 x Safety guide Software is downloadable Reviews “How do they sound? To sum it up in a word I’d go with impressive.” Production Expert (read the full review here) “The newest member of Neumann’s celebrated KH family of monitors might be the smallest but it’s also the most technologically advanced.” Sound on Sound (read the full review here) Features Neumann MA 1 Monitor Alignment Exceptional acoustic results for stereo home and professional studio setups Highest accuracy for tonality and impulse reproduction Purpose built for stereo pairs of Neumann studio monitors Correct your room with ease thanks to advanced calibration algorithms Developed by the world’s leading institute for audio signal processing (IIS) for the best monitor quality possible Easy to use software compatible with both Mac and PC No plug-in or special audio drivers required – everything is stored in the DSP-powered monitors for ease of use Optimised amplitude response and phase thanks to dedicated software Comes fully equipped with an individually calibrated measurement microphone Neumann KH 80 DSP A Studio Monitor 4″ & 1″ drivers powered by high efficiency 120w & 70w amplifiers Computer modeled optimised drivers & MMD waveguide 57Hz (-3dB) bass extension & 108.8 dB SPL at 1 m DSP engine with standard IP networking & Neumann Control Software Compatible with existing range of Neumann analog studio monitors and sub-woofers Specifications Neumann MA 1 Monitor Alignment Acoustical operating principle: Pressure transducer Directional pattern: Omnidirectional Frequency range: 20Hz – 20kHz Sensitivity at 1kHz into 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software) Rated impedance: 50 ohms Rated load impedance: 1000 ohms Equivalent noise level CCIR: 39dB Equivalent noise level A-weighted: 27 Db-A Maximum SPL for THD 0.5 : 132dB Signal-to-noise ratio CCIR (re. 94 dB SPL): 55dB Signal-to-noise ratio A-weighted (re. 94 dB SPL): 67 dB Maximum output voltage: 10dBu Supply voltage (P48 IEC 61938): 48V +/- 4V Current consumption (P48 IEC 61938): 3 mA Matching connector: XLR3F Weight: 37g Diameter: 23mm Length: 117mm Neumann KH 80 DSP A Studio Monitor Woofer: 4″ (100mm) With Integrated Black Grille Tweeter: 1″ (25mm) With Integrated Black Grille Bass Amplifier Output: 90W 120W Treble Amplifier Output: 50W 70W Controller Design: Digital Active Crossover Frequency: 1.8kHz Crossover Slope: 48 dB/oct 8th Order With Phase Correction Equalisation – Low Mid: 0dB -1.5dB -3dB -4.5dB Equalisation – Via Neumann Control: 8 x Full Parametric IIR + Low/High Shelf Global Balance FIR Phase Correction: Linear Phase (170Hz – 16kHz +/- 45°) Analog Emulation Protection Circuitry: Independent Soft Clip Peak and Thermo Limiters For Woofer and Tweeter. Woofer Excursion Limiter Infrasonic Filter – Frequency; Slope : 61Hz; 12dB/oct Input: XLR/TRS Combo Analog Electronically Balanced Impedance: 14kOhms Input Gain Control: 0 dB to -15dB Output Level Control: 94dB/100dB/108dB/114dB Sound Pressure Level CMRR: >56 dB @ 15kHz Max Input Level: +24 dBu for 94dB SPL Setting Digital Converter: 24-bit DAC Digital Internal Sampling Rate: 48kHz Dynamic Range D-A – Woofer Tweeter: 114dB 117dB User Adjustable Delay Range: 0ms – 70ms Audio-Video/Lip Sync Max Frames: 1.75 or 2.1 Time-Of-Flight Max Distance: 24m Resolution: 0.1 ms / 3.44 cm Mains Power Supply: 100-240V 50/60Hz Cabinet Surface: Painted Compositive Polycarbonate Material Operating Conditions: +10° C to +40° C Transport/Storage Conditions: -25° to +70° Mounting Points: 2 x M6 Threaded Inserts With 70mm Spacing On Back Panel Depth From Outside of Cabinet 16mm Dimensions: 233mm x 154mm x 194mm (H x W x D) Weight: 3.4 kg Product code: MA1-KH80-UK
CHECK PRICES AT ZZOUNDS
