The Markbass Little Mark IV Bass Amp Head is a compact and lightweight bass head that still holds an incredibly warm natural tone. Innovation is key and building off the Little Mark III the Mark IV comes with some fantastic new additions all of which have been heavily requested by their artists and customers. A new bi-band limiter responds faster and more dynamically to your playing allowing you to add nuances to your booming bass. An updated four-band EQ offers effective controls to easily personalise your sound either boosting or cutting up to 16dB for all four bands. Volume isnt an issue with this bass head. A line out level control knob offers precise control of the level sent out to the mixer a pre/post EQ switch means you can route your XLR output before or after the EQ as required. The handy little mute switch is positioned on the front of the amp so you can quickly cut the sound for those moments when you need to hear anything other than this fantastic bass tone. Packing an earth shattering 500W rms at four ohms or 300W rms at eight the Little Mark IV definitely doesnt sound small.
Unlimited tone Blow the room away. With 500W of power at 4 ohms and 300W at 8 this amp will blast your basslines out at incredible force offering more volume than you would ever need. What makes it even better is this earthquake of sound doesn’t come at the detriment of the amp’s tone. The Little Mark IV still holds its iconic natural warmth and provides multiple ways to refine every little detail. A four band EQ is a perfect place to start giving you plenty of room to adjust with the ability to either increase or decrease each band up to 16dB making the head easily customisable to suit any genre. For quicker access to the EQ Markbass have included a three-way switch letting you quickly change between a super-balanced flat tone a scooped pre-set that boosts highs and lows while dropping the mids or finally a footswitch option to control the mute and scooped EQ simultaneously. No connectivity difficulty Optimised so you can efficiently connect your devices the Little Mark IV offers up a wide selection of connectivity options. An effects loop is situated on the back of the amp head meaning that you can send the tonal influence of the amp to your effects as opposed to just the raw signal of your bass giving you more tonal variation. As you would expect a standard unbalanced 1/4 “ jack input is featured on the front alongside a combo speaker output which is featured on the back alongside a standard DI line out. A tuner out connection also allows you to add a tuner into your setup to ensure total tonal accuracy during every moment of the performance. It’s safe to say these features make this bass head extremely user friendly. Gig ready The Markbass Little Mark IV is the perfect companion for the gigging bassist. Designed to be portable this bass head weighs in at just 2.8kg making it extremely lightweight especially when considering the power it possesses. Built in house from the ground up the bass head comes packed with a power amp crafted to elevate the inherent tone of your instrument ensuring an exceptional live tone so you can perform without limitations. Specifications Input Impedance: 1 Mohm Max. Voltage: 9 Vpp Return Impedance: 22 Kohm Max. Voltage: 10 Vpp Gain: –46 Db To +23 Db Range Line Out Level Control: On Front Panel Pre/Post Eq (For Line Out) Switch: On Rear Panel Ground Lift Switch: On Rear Panel Volume Controls: Mute Switch Master Volume Low: Center Frequency 68 Hz; Level: ±16 Db Mid Low: Center Frequency 360 Hz; Level: ±16 Db Mid High: Center Frequency 800 Hz; Level: ±16 Db High: Center Frequency 10 Khz; Level: ±16 Db Old School: Max Cut Range: 250 Hz – 20 Khz 3 Way Switch: Flat/Scooped-Mid/Fsw Send Effects: Unbalanced Max. Voltage 20 Vpp Tuner Out: Unbalanced Max. Voltage 2 Vpp Line Out: Balanced Xlr Max. Voltage 20 Vpp Speaker Out: Speakon/1/4” Combo 1/4”* Height: 2 Rack Units (3.27 In. / 83 Mm) Width: 10.87 In. / 27.6 Cm (19 In. / 48.3 Cm With Optional Rack Ears) Depth: 10.04 In. / 25.5 Cm Weight: 6.17 Lbs / 2.8 Kg Limiter: Bi-Band Limiter Footswitch (Optional): Flat/Scooped-Mid Output Power: 500w Rms @ 4 Ohm 300w Rms @ 8 Ohm Power Requirement: 100v; 120v; 230v; 240v 50/60hz (Voltage Is Factory Preset According To Region Of Sale)
CHECK PRICES AT ZZOUNDS
