The QSC KLA12 Active Line Array Speaker provides 500 watts of power. Enough to fill a small venue on its own. However when combined with an array to be hung from your trussing the sound can be huge perfect for large professional venues or outdoor events like festivals. Its Ar-Q frequency optimisation tunes all of the KLA12 modules when in an array for a quick consistent result. The KLA12 is built from a lightweight tough ABS enclosure making it safe and simple to suspend while minimising risk. It also features QSCs Tilt-Direct which adjusts the speaker modules response to its angle perfect for staggered and curved arrays or set up on its own for optimal coverage and sound quality.
Massive sound Whether you use the KLA12 in an array or on its own. You can be certain you will get incredibly powerful sound. This 500w speaker provides your venue with room-filling sounds – and for larger venues you can project massive amounts of sound energy into the audience. Each wave as thrilling as the last. There is a range of incredible features included on the KLA12. These include the Ar-Q frequency optimization which quickly tunes the array with a click of a dial. Tilt-Direct which allows you to position the speaker easily when used on its own and the extensive DSP – which simply increases the performance to outstanding levels. All housed in an ABS enclosure which delivers a very lightweight construction. Features 500 W + 500 W power module Rugged ABS enclosure delivers light-weight durability SOLO™ Rigging System supports deployment without tools or external hardware Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial adjusting for the appropriate number of boxes 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 × KLA12 and 2 × KLA181 90° × 18° nominal coverage (requires only five boxes to configure a 90° x 90° array) High power 12-inch low-frequency driver provides extension down to 44Hz without subwoofers Extensive DSP further enhances and protects performance 1.75-inch diaphragm compression driver delivers clear and powerful high-frequency reproduction powerCON® Input and Thru connections Tilt-Direct™ pole mount assists directivity in single-unit applications Specifications Configuration: Multipurpose 2-way Transducers: High Frequency: 1.75-inch diaphragm compression driver Low Frequency: 12-inch cone transducer Frequency Response (-6 dB): 49 Hz – 18 kHz Frequency Range (-10 dB): 44 Hz – 20 kHz Nominal Coverage: 90° H x 18° V Maximum SPL (1 meter): 131 dB peak Power Output: HF: 500 W Class D continuous LF: 500 W Class D continuous Input Impedance XLR: 40 kΩ balanced / 20 kΩ unbalanced Controls: Power Attenuation LF Setting (External Sub/Normal/DEEP™) Array Size (1-5) Front LED (Pwr/Limit/Off) Indicators: Power Signal Standby Limit Connectors: Balanced female XLR line level input Balanced male XLR full range line level out Remote attenuation control Locking powerCON power connector AC In Locking powerCON® power connector AC Out Cooling: On demand 50 mm variable speed fan Amplifier Protection: Thermal limiting output overcurrent overtemperature muting GuardRail™ Transducer Protection: Thermal limiting excursion limiting AC Power Input: Universal power supply 100–240 VAC 50 to 60 Hz AC Power Consumption (1/8 Power): 100 VAC 2.3 A 120 VAC 2.01 A 230 VAC 1.13 A Material: Impact resistant ABS Finish: Black or white paint Grille: Rugged powder-coated steel grille Dimensions (H x W x D) inches: 15.0 × 23.4 × 16.6 Dimensions (H x W x D) mm: 382 x 594 x 422 Net Weight: 55 lb/25 kg
CHECK PRICES AT ZZOUNDS
