Electro-Voice ELX112 12″ Passive PA Speaker – Nearly New

zZounds

Electro-Voice ELX112 12
Improve your stage presence. The Electro-Voice ELX112 12″ Passive PA Speaker is everything you need to get your talent heard. With 1000W peak power output, you’ll get pristine audio at maximum volumes. Deep lows. Crisp highs. And everything in between. The ELX112 gets its superior sound quality from a 12″ woofer and 1.5″ tweeter. Both drivers work together to bring you articulate audio across an extended frequency range.

Whether used for sound reinforcement or stage monitoring, you’re sure to hear every detail. It’s a rough world out there. But don’t worry. The ELX112 is built for the road. Boasting a 15mm plywood enclosure, this robust loudspeaker is as tough as it is lightweight. And thanks to a pole mountable design, it’s easier than ever to set your speaker up.

[More info…](https://www.awin1.com/pclick.php?p=36679417026&a=107253&m=1117)

The definition of great sound Performance assured. No matter what the scenario. The ELX112 is built for versatility. But that doesn’t mean it compromises on sound quality. Both drivers have been specially selected for their tight, accurate response. That means clear audio across an extended frequency range, allowing you to hear every nuance of your music.

Whether your audience is stood at the back, front, or sides of the crowd, the ELX112 lets them hear everything. Designed for exceptional sound dispersion, the ELX112 boasts a 90-degree x 50-degree coverage-pattern waveguide. That means your performance will stand out no matter where you play. Only the sound you want.

The ELX112 minimizes resonance and rattling with additional internal bracing. You’ll never have unwanted sounds from your enclosure getting in the way of a great show. Even at 132dB max SPL, your audio will be clear and pristine.

Features:
– Exceptional stage presence, perfect for sound reinforcement and stage monitoring
– Enormous power with 250W continuous and 1000W peak output
– Deep bass impact from a 12″ woofer
– Clear highs from a 1.5″ titanium compression driver
– Articulate sound across an extended frequency range (55Hz – 20kHz)
– Excellent sound dispersion with 90-degree x 50-degree coverage-pattern waveguide
– Perfect as a floor monitor with a 60-degree monitor angle
– Clear sound at high volumes with 132 dB max SPL
– Minimal resonance thanks to internal bracing
– Lightweight and robust 15mm plywood enclosure
– Scratch and scuff resistant black textured finish
– Easy to set up with Live X Subwoofers thanks to pole mount and stackable design

Specifications:
– Speaker Type: Full-Range Two-Way Wedges
– Woofer Size: 12″
– Power Rating: 250W Continuous, 1000W Peak
– Nominal Impedance (Passive): 8 Ω
– Minimum Impedance: 7 Ω
– Coverage (Nominal -6 dB) H: 90°
– Coverage (Nominal -6 dB) V: 50°
– Frequency Response (-3 dB): 82Hz – 18kHz
– Frequency Response (-10 dB): 55Hz – 20kHz
– Internal Crossover: Yes
– Recommended High-Pass Frequency: 45Hz
– Max SPL: 132 dB
– Axial Sensitivity: 94 dB
– LF Transducer: EVS-12K 12″ Woofer
– HF Transducer: DH-1K 1.5″ Titanium Diaphragm Compression Driver
– Crossover Frequency: 2100Hz
– Connector Type: Parallel Neutrik NL4
– Grille: 18GA Steel With Black Powdercoat
– Case Material: 9-Ply 15mm Plywood Internally Braced With Textured Paint
– Colour: Black
– Weight: 16 kg
– Dimensions:
– Height: 607 mm
– Width: 362 mm
– Depth: 340 mm


CHECK PRICES AT ZZOUNDS