The Behringer ULTRA-DI DI20 Active DI Box is a versatile device that allows you to connect your instrument to a variety of devices. It ensures a perfect match between your signal and impedance, allowing you to connect to mixers, amplifiers, and more while delivering exceptional sonic performance and optimized signal flow.
With two channels onboard, you can use the DI20 in either 2-Channel mode or Link mode. In 2-Channel mode, each channel is converted independently to the corresponding XLR outputs. In Link mode, you can split input 1 across both channels to connect to multiple destinations. You can even use the second input as a 1/4″ link output to connect to your amp on stage. Additionally, the DI20 is built to last with its rugged construction and is backed by Behringer’s 3-year warranty program.
When you need to connect your instrument to something other than your amplifier, it can be a hassle dealing with different impedances, signal types, and connectors. The Behringer DI20 solves this problem by providing perfectly-matched impedances and signals with outstanding sound quality. It features an active design and can be powered by a standard 9V battery or via 18-48VDC phantom power. The internal battery automatically shuts off when phantom power is applied, allowing you to use both power sources without draining the battery unnecessarily.
Operating the DI20 is straightforward. It offers two channels, each equipped with a 1/4″ input and a balanced XLR output. The box converts your unbalanced signal from the 1/4″ input into a balanced signal that can be connected to a wide range of devices without worrying about mismatched impedances or poor signal quality. The second channel’s input can also be used as a link output for channel 1, allowing you to send your instrument signal to an amplifier while sending the balanced signals out simultaneously. Just adjust the 2-CH/LINK switch to your desired mode.
The DI20 provides three additional switches for optimizing your setup. The Battery switch turns the DI20 on or off using battery power. The Attenuation switch allows you to add a 20dB or 40dB pad to compensate for hotter signals. The Ground Lift switch is handy for eliminating hum and buzz caused by ground loops. Furthermore, the DI20 features a servo-balanced design for an ultra-flat frequency response and a rugged metal housing, ensuring high-quality and reliable performance on stage and in the studio.
Key Features:
– Professional multi-purpose DI box for the stage and studio
– Impedance and signal matching for direct instrument connection
– Converts unbalanced 1/4″ TRS line inputs into balanced XLR outputs
– Additional split mode for channel 1 assignment to both XLR outputs
– Ultra-flat frequency response due to servo-balanced operation
– Internal battery shuts off when phantom power is applied
– Ground lift switch eliminates ground loop problems
– Designed and engineered in Germany
– Covered by Behringer’s 3-year warranty program
Specifications:
– Frequency Response: 10Hz to 70kHz (-3dB)
– Noise: 100dBu
– Distortion: Less than 0.014% (1kHz 0dBu in)
– Input Resistance: Greater than 250k Ohms
– Connection Impedance: Greater than 600 Ohms
– Input: 1/4″ mono jack x 2
– Output: XLR balanced x 2
– Maximum Input Level: +12/+32/+52dBu
– Phantom Power: 18VDC to 48VDC
– Battery Power: 9V 6LR91
– Dimensions: Approx. 150mm x 130mm x 60mm / 6″ x 5″ x 2-3/8″
– Weight: Approx. 240g
– Product Code: DI20
For more information, please visit the link provided.
CHECK PRICES AT ZZOUNDS
