Shure BLX188-K3E Dual Wireless Guitar System with WA302 Cables

zZounds

Shure BLX188-K3E Dual Wireless Guitar System with WA302 Cables
The Shure BLX188 Dual Wireless Bodypack System is a high-quality analog wireless system perfect for giving musicians the freedom to move around as they perform. The system includes 2 x BLX1 Bodypack Transmitters with 2 x WA302 Instrument Cables along with the versatile BLX88 Dual Wireless Receiver offering superior wireless performance for guitarists, bassists, and other musicians.

Please Note: The Shure BLX88 Dual Guitar Wireless System operates in the 606 – 630 MHz band. A valid license is required to operate wireless equipment in some territories.

WA302 Instrument Cable
Compatible with all Shure bodypack transmitters, the WA302 cable measures 2.5ft and features a 4-pin connector to 1/4″ jack. The instrument cable is compatible with the BLX1 bodypack transmitter included within this system. However, should you wish to use other transmitters, then the cable is also compatible with the T1, SC1, PG1, PGX1, SLX1, LX1, U1, UC1, ULX, UR1, UR1M, UR1H, and UT1 bodypack transmitters.

BLX88 Wireless Receiver
The Shure BLX88 Dual Channel Wireless Receiver features Shure’s innovative QuickScan automatic frequency scanning system and microprocessor-controlled true diversity operation, providing incredibly consistent signal reception with minimal setup. The Dual Receiver offers improved linearity and frequency response over previous iterations. The BLX88 receiver comes with both XLR and 1/4″ outputs, making it perfect for a wide range of performers, including vocalists, guitarists, bassists, and more.

BLX1 Bodypack Transmitter
The transmitter included within this Shure wireless system is both lightweight and durable. The compact transmitter fits comfortably in hand and features adjustable gain control, quick and easy frequency matching, and a power/battery status LED. The BLX1 can run up to 14 hours of continuous use with AA batteries (included with the system) and has an operating range of up to 100 meters.

Included In The System
– 2 x WA302 Instrument Cable
– 1 x BLX88 Dual Channel Wireless Receiver
– 2 x BLX1 Bodypack Transmitter
– 1 x Carrying Case
– 1 x Power Supply
– 1 x Thread Adapter

Features
BLX88 Wireless Receiver
– Up to 12 compatible systems
– Microprocessor-controlled internal antenna diversity
– One-touch QuickScan
– Two-color audio status indicator LED

BLX1 Wireless Bodypack Transmitter
– Power & battery status LED
– Adjustable gain control
– Quick & easy frequency matching
– Included AA batteries that provide up to 14 hours of continuous use
– Operating range of up to 100 meters

Specifications
BLX188 Wireless Dual Guitar System
– Set Type: Dual Guitar/Bass
– Amount Of Bodypacks: 2
– Number Of Compatible Systems Per Frequency Band: 12
– Selectable frequencies: Up to 150
– Auto Setup Features: QuickScan – finds group with most compatible frequencies and sets to best frequency
– Audio Reference Companding: Yes
– Included Antennas: Internal
– Transmitter Display: LED
– Receiver Display: LED
– Battery Endurance: 2AA up to 14h
– Environment: Daily Touring
– Operating Range: 91 m (line of sight – actual range depends on RF signal absorption reflection and interference)
– Operating Frequencies: 606 – 630 MHz
– Audio Range: 50 Hz – 15 kHz (dependent on microphone type)
– Transmitter RF Output Power: 10 mW typical (varies by region)
– Audio Output Connector: XLR and 1/4″ (6.3 mm) unbalanced
– Maximum Output Level: -27 dBV (XLR mic level), -13 dBV (1/4″)
– Battery Life: Up to 14 hours
– Dynamic Range: 100 dB A-weighted
– System Distortion: 0.5 THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
– Operating Temperature Range: -18°C (0°F) – +50°C (122°F)

BLX88 Dual Wireless Receiver
– Transmission: Analog
– Type of Power Supply: External
– Receiver Housings: Molded ABS
– Active Antenna Possible: No
– Bias via BNC: No
– High-Density Mode: No
– Interference Detection: No
– Remote Control: No
– Number Of Compatible Systems Per Frequency Band: 12
– DANTE Audio Network Interface: No
– Scan Features: Quick Scan
– Detachable Antennas: No
– Logic: No
– Cascade: No
– Rack Hardware: Optional URT2
– Receiver Displays: LEDs
– Receiver Type: Dual
– Line Mic Switch: No
– Image Rejection: 50 dB Typical
– RF Sensitivity: -105 dBm For 12dB SINAD Typical
– Phantom Power Protection: No
– Weight: 429 g
– Dimensions Height: 40 mm, Width: 388 mm, Depth: 116 mm

BLX1 Wireless Bodypack Transmitter
– Form Factor: Bodypack
– Operating Range (Up To): 100 m
– Battery Life Alkaline: 14 h
– Transmitter Housings: Molded ABS
– Audio Mute: No
– Detachable Antenna: No
– Switchable RF Power: No
– Batteries: AA
– Battery Status: Multi-Color LED
– Connectors: TQG
– Frequency Diversity: No
– Functionality: Transmitter
– Gain Adjustment Range: 26 dB
– High-Density Mode: No
– Included Antenna: 1/4 Wave
– Input Impedance: 1 MΩ
– Weight: 75 g
– Dimensions: Height: 110 mm, Width: 64 mm, Depth: 21 mm


CHECK PRICES AT ZZOUNDS