Ideal for a woodwind instruments, the Audio Technica ATM350W Instrument Mic kit is the ultimate choice for any engineer and performer. You’ll be provided with a versatile set of tools that will empower you.
The kit includes a premium quality ATM350a cardioid microphone, AT8543 in-line power module, UniMount clip-on mount, 5″ gooseneck, as well as a hook and loop woodwind mount. The ATM350W is just as comfortable on-the-road as it is in the studio. Thanks to its cardioid polar pattern, you can ensure a tight focused sound with excellent off axis rejection.
Get the sound right at source. The ATM350W includes a switchable high-pass filter, allowing you to reduce low-end rumble and other unnecessary frequencies. This will save you time later at the mixing stage. If you’re serious about high-quality capture, then look no further than the ATM350W by Audio-Technica.
Features:
– Low-profile microphone design provides unobtrusive mounting with minimal visibility
– Crisp, clear, and well-balanced microphone response even at high SPLs
– Cardioid polar pattern reduces pickup of sounds from the sides and rear, providing excellent isolation of your desired sound source
– UniMount woodwind mount attaches securely to any woodwind instrument via a flexible strap, whilst providing excellent shock resistance for the microphone
– Rugged UniMount 5 gooseneck rigidly holds its shape, maintaining accurate microphone positioning even during aggressive play
– In-line power module is equipped with a switchable 80Hz high-pass filter for controlling undesirable low-frequency ambient noise
– Optional interchangeable elements available for hypercardioid and omnidirectional polar patterns (not included in this kit, must be purchased separately)
Specifications:
– Microphone Element: Fixed-charge back plate permanently polarized condenser
– Polar Pattern: Cardioid
– Frequency Response: 40Hz to 20kHz
– Low-Frequency Roll-Off: 80Hz 12dB/Oct
– Open Circuit Sensitivity: -49dB (3.5mV) re 1V at 1Pa
– Impedance: 200 Ohms
– Maximum Input Sound Level: 159dB SPL 1kHz at 1 percent THD
– Dynamic Range (Typical): 130dB 1kHz at max. SPL
– Signal-To-Noise Ratio: 65dB 1kHz at 1Pa
– Phantom Power Requirements: 11 – 52V DC 3.5mA typical
– Switch: Flat Roll-Off
– Microphone Weight: 14.5g / 0.5oz.
– Microphone Dimensions: 37.8mm / 1.49″ long, 12.2mm / 0.48″ max. body diameter
– Power Module Weight: 90g / 3.2oz.
– Power Module Dimensions: 92mm / 3.62″ long, 18.9mm / 0.74″ diameter
– Power Module Output Connector: Integral 3-pin XLRM-type
– Cable: 4.0m / 13.1ft long (permanently attached to microphone), 3.2mm / 0.13″ diameter, 2-conductor shielded cable with HIROSE HR10-type connector
– Optional Interchangeable Elements: UE-H Hypercardioid (Not Included), UE-O Omnidirectional (Not Included)
– Included Accessories: ATM350a Cardioid Condenser Microphone, AT8543 Power Module, AT8491W UniMount Woodwind Mount, AT8490 UniMount 5 Gooseneck, Protective Carry-Case
– Product Code: ATM350W
