Audio Technica ATM450 Cardioid Condenser Instrument Microphone

zZounds

Audio Technica ATM450 Cardioid Condenser Instrument Microphone
The Audio Technica ATM450 cardioid condenser microphone is a rising star in the recording industry. With its innovative design, this microphone will revolutionize your recording techniques and workflow. Its side-address stick design allows for infinite placement options with minimal obstructions.

One of the key features of the ATM450 is the in-built 80Hz hi-pass filter, which saves you time in post-production by removing unnecessary low-end content. This is especially useful when working with loud sources like drums and amplifiers. The microphone also has a switchable -10dB pad to lower its sensitivity in these situations.

Thanks to its extended flat frequency response, the ATM450 captures honest and detailed recordings that capture even the subtlest nuances. This ensures that the sound you hear in the room is accurately reproduced through the speakers.

The ATM450 is perfect for overheads, percussion, acoustic guitar, strings, and other acoustic instruments. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

This microphone is built to last, with a rugged all-metal design and construction. It includes an isolation clamp for shock protection, secure mounting, and easy positioning.

Specifications:
– Element: Fixed-charge back plate permanently polarized condenser
– Polar Pattern: Cardioid
– Frequency Response: 40-20000 Hz
– Low Frequency Roll Off: 80 Hz 18 dB/octave
– Open Circuit Sensitivity: 41 dB (8.9 mV) re 1V at 1 Pa
– Impedance: 200 ohms
– Maximum Input Sound Level: 152 dB SPL 1 kHz at 1 T.H.D.
– Dynamic Range: 127 dB 1 kHz at Max SPL
– Signal to Noise Ratio: 69 dB 1 kHz at 1 Pa
– Phantom Power Requirements: 11-52V DC 3.5 mA typical
– Dimensions: 126.9 mm (5.00″) long 21.0 mm (0.83″) diameter
– Output Connector: Integral 3-pin XLRM-type

The Audio Technica ATM450 comes with accessories such as the AT8471 isolation clamp for 5/8″-27 threaded stands, a 5/8″-27 to 3/8″-16 threaded adapter, windscreen, and a soft protective pouch.

For more information about the Audio Technica ATM450, please visit the link provided.


CHECK PRICES AT ZZOUNDS