From deep lows to bright highs. The Sennheiser e614 Overhead Condenser Microphone lets you focus on the details. Whether you’re recording woodwind string instruments or anything in between, you’ll get faithful audio capture across an extremely wide frequency response. That means crystal clear sound – no matter where you perform.
The e614 boasts outstanding directivity, isolating your instruments for pristine quality. You’ll get less ambient noise and feedback, all thanks to a supercardioid polar pattern. Just position your microphone stand back and let the e614 do the work. Whether you’re performing quiet or loud, soft or hard, you’ll hear every single nuance – all without distortion. This bundle comes complete with two microphones, two stands, and two microphone cables so you can get to work straight out of the box.
Built for the most demanding performances. Ready for any challenge. Even in the most extreme scenarios. The e614 utilizes an extended frequency response and high SLP handling capabilities to bring you the sound that you deserve. No distortion. No coloration. Just the finer details. Discover natural audio reproduction thanks to outstanding transient response. From 40Hz to 20kHz, you get crisp, clear pickup of every single nuance. As a result, the e614 is perfect for a wide array of instrument types. All you have to do is bring your talent. Sennheiser does the rest.
What’s in the box?
– 2 x e614 Overhead Microphone
– 2 x Microphone Pouch
– 2 x MZQ 100 Microphone Clip
– 2 x Boom Mic Stand by Gear4music
– 2 x XLR (F) to XLR (M) Microphone Cable 9m
Features:
– Perfect for all instrument types with an extremely wide frequency response
– Capture every detail with an electret condenser element
– Exceptional feedback rejection from a supercardioid polar pattern
– Faithful sound stage for the most accurate instrument recordings
– Crystal clear audio even at high sound pressure levels
– Ready for the road with a heavy-duty construction
– Lightweight, compact, and portable enclosure
– Includes fully adjustable microphone stands so you can position with ease
– Pristine connection from two high-quality XLR cables
Specifications:
Sennheiser e614 Overhead Microphone
– Connector: XLR-3
– Frequency Response: 40 – 20000 Hz
– Transducer Principle: Pre-polarized condenser microphone
– Pick-Up Pattern: Supercardioid
– Sensitivity In Free Field No Load (1kHz): 3 mV/Pa = -50dB (0 dB = 1 V/Pa)
– Nominal Impedance: 50 Ω
– Min. Terminating Impedance: 1000 Ω
– Phantom Powering: 12 – 52 V / 3 mA
– Equivalent Noise Level: 24 dB(A)
– Equivalent Noise Level Weighted As Per CCIR 468-3: 35 dB
– Maximum Sound Pressure Level (Passive): 139 dB/SPL
– Dimensions: ø 20mm, L = 100mm
– Weight (Without Cable): 93 g
Boom Mic Stand by Gear4music
– Mic Thread: 5/8″ (15.875mm)
– Min Stand Height: 900mm (floor to boom swivel)
– Max Stand Height: 1500mm (floor to boom swivel)
– Stand with Full Extended Boom Height: 970mm – 1515mm
– Boom Arm Length: 800mm
XLR (F) – XLR (M) Microphone Cable 9m
– Length: 6m
– Insulation: PVC jacket
– Shield: Spiral shield 63 x 0.12mm
– Conductors: 20 x 0.12mm
– Colour: Black
