The Behringer SU9920 Sonic Ultramizer is a signal processor that adds liveliness and vitality to your audio signals. Live or in the studio; wherever you use it you’ll boost your recordings and live shows to the max. Using its dynamic filter and 3-band phase delay, the SU9920 is a premium product to get you that premium sound.
The Sonic Ultramizer SU9920 greatly enhances the stereo sound of your music. You’ll hear more clarity, punchier bottoms, and natural brightness. Your low frequencies will experience increased density. The setup is fast and easy thanks to dedicated low contour and process controls.
A Versatile Sound Enhancer
The Sonic Ultramizer SU9920 is a great tool live and in the studio. Boost the quality of your live sound, whether that be in a small venue or large concert hall. Or use it to enhance your recordings in the studio, perhaps as a finishing touch. But it doesn’t just stop at music, you can use it in 5.1 and hi-fi setups and enhance spatial sound quality. Use it to enhance the presence of broadcasts and webcasts too, or even use it in your car.
Use the SU9920 On Your Guitar, Bass, or Keyboard
This stereo enhancer is surprisingly versatile and you can use it to enhance individual signals from guitars, basses, or keyboards. Connect it into the signal path to assist your amp, and since there are options of dual mono or stereo, you can connect two instruments and share the quality across two mono channels.
Impressive Range and Connectivity
The frequency response ranges from 25Hz to 50kHz. The Low Contour filter reaches to +12dBu at 50Hz, and the process control can boost up to +12 dBu at 5 kHz. The SU9920 has XLR and 1/4″ inputs and outputs and can be used in parallel should two outputs be needed. The SU9920 is built with high-quality components and rugged construction to ensure the long-lasting life of the product.
Specifications
– Dimensions: 44.5mm x 483mm x 217mm / 1.8 x 19 x 8.5 (H x W x D)
– Weight: 2.2kg / 4.84lbs
– Inputs: Connections: XLR Sockets and 1/4″ Stereo Jacks
Type: Balanced
Input Impedance: 20kΩ balanced, 10kΩ unbalanced
Input Levels: +4 dBu (Nominal), +22 dBu (Maximum)
– Outputs: Connections: XLR Sockets and 1/4″ Stereo Jacks
Type: Servo-Balanced
Output Impedance: 60Ω balanced, 60Ω unbalanced
Max. Output Level: +22dBu
– Enhancer Section: Type: 3-Band phase delay and dynamic filter
Process Control: Max. 12 dBu @ 5 kHz
Low Contour Control: Max. 12 dBu @ 50kHz
– System Data: Frequency Response: 25 Hz to 50kHz +/-3 dB
Signal-to-noise Ratio: >95 dB unweighted 20Hz to 20kHz
Distortion (THD + N): 0.05 typ. @ +4 dBu 1 kHz (In/Out)
Crosstalk: >75 dB
– Power Supply: Mains Voltage: 230 VAC, 50 Hz
Power Consumption: Approx. 12 W
Fuse: 100-120 VAC: T 250 mA H 250 V, 220-240 VAC:T 125 mA H 250 V
